Controller Brushless Ultra Control 20A for GR-12 Multicopter

S3056.MB
€29.99 *

Prices per unit incl. VAT plus shipping costs

Shipping 1-3 workdays


Characteristics:
  • Open Source BL Heli Software 14.2
  • Only open source ESCs with Silabs processor, updateable and programmable via the Graupner update cable No. 7168.6
  • The new Silabs processor doubles the wire speed for higher maximum speeds and more precise timing at high speeds
  • High DFN 3.3x3.3 EP FET amplifiers with low internal resistance <1.7 mOhm
  • Special fast FET drivers for more effective active freewheeling and cooler condensators
  • Ceramic capacitors for super fast start-up and high operational safety
  • High-precision resistors for faster and more accurate motor start
  • Damped Light mode preset for precise flight characteristics
  • Automatic detection for normal receiver pulses and OneShot mode
  • Preset servo travels and all other settings for the GR-10C and Race Copter
  • Receiver cable 100 mm
  • Speed limit: 400,000 U / min with 2 pole motors
  • Connectors for the GR-10C receiver

Highlights:
  • Open Source BL Heli Software 14.2
  • 50 MHz Silabs Prozessor
  • Power SO8 FETs Endstufen
  • Innenwiderstand typ. 1.6 mOhm
  • Spezielle FET-Treiber
  • Ultra Low ESR Kondensator
  • PPM- Empfängerpulse und OneShot
  • Multishot per Update verfügbar
  • Servowege und Einstellungen für GR-10C

Related links to "Controller Brushless Ultra Control 20A for GR-12 Multicopter"
Technical information
Dimensions approx. : 23 x 12 x 5
Battery plug connection: Cable
Operating voltage(V) language dependent: 7,4 - 15,2
Width [mm]: 12
Brushless: Yes
Max. continous current [A]: 20
Weight incl. leads [g]: 7
Height [mm]: 5
Overall length [mm]: 23
Max. continous current [A]: 20
Type: Opto
Cell count, LiPo, Lilo, LiFe: 2 - 4S
Receiver GR-10C Copter Flight Control Receiver GR-10C Copter Flight Control

Shipping 1-3 workdays

€79.99 *
3D Multicopter High-Power Drive Set 3D Multicopter High-Power Drive Set

Shipping 1-3 workdays

€217.00 *
Receiver GR-18 +3xG + 3A + Vario HoTT Receiver GR-18 +3xG + 3A + Vario HoTT

Shipping 1-3 workdays

€149.99 *
NEW
Control ULTRA 7A BL Heli 2-3S Control ULTRA 7A BL Heli 2-3S

Out of stock

€14.99 *
ULTRA 2812 920KV bru shless Motor CW ULTRA 2812 920KV bru shless Motor CW

Shipping 1-3 workdays

€26.99 * €20.00 *
Voltage Modul mit SB EC 22.2V für GR-10C Voltage Modul mit SB EC 22.2V für GR-10C

Shipping 1-3 workdays

€27.99 *
receiver GR-12SC+ Ho TT receiver GR-12SC+ Ho TT

Shipping 1-3 workdays

€34.99 *
250 Multicopter Drive Set for Beginners 250 Multicopter Drive Set for Beginners

Shipping 1-3 workdays

€178.00 *
USB Interface cable HoTT/GM-Genius USB Interface cable HoTT/GM-Genius

Shipping 1-3 workdays

€27.99 *
BRUSHLESS CONTROL +T 18 BEC SH BRUSHLESS CONTROL +T 18 BEC SH

Shipping 1-3 workdays

€59.99 * €43.00 *
NEW
Regler ULTRA 4x25A, 2-4s, BLHeli32 Regler ULTRA 4x25A, 2-4s, BLHeli32

Shipping 1-3 workdays

€57.99 *
NEW
NEW
Radio Control mz-12 HoTT, GB, 12 Channels Radio Control mz-12 HoTT, GB, 12 Channels

Shipping 1-3 workdays

€179.99 *
Kabelset SH für Omni bus FCs Kabelset SH für Omni bus FCs

Shipping 1-3 workdays

€9.99 *
EXCLUSIVE!
Flite Test VersaCopter 280 quad frame kit Flite Test VersaCopter 280 quad frame kit

Shipping 1-3 workdays

€79.99 *
ULTRA 2809 2300KV br ushless Motor CCW ULTRA 2809 2300KV br ushless Motor CCW

Shipping 1-3 workdays

€24.99 *
3D Copter Alpha 300Q HoTT - Finished Model 3D Copter Alpha 300Q HoTT - Finished Model

Shipping 1-3 workdays

€509.99 *
receiver GR-12SH +3x G HoTT receiver GR-12SH +3x G HoTT

Shipping 1-3 workdays

€59.99 *
GR-12 receiver HoTT  GR-12 receiver HoTT

Shipping 1-3 workdays

€65.99 *
Servo digital DS 101 8,5 mm SH-Plug Servo digital DS 101 8,5 mm SH-Plug

Shipping 1-3 workdays

€9.99 *
SH-Stecker 6. pol f. ESC-An. Omnibus FCs SH-Stecker 6. pol f. ESC-An. Omnibus FCs

Shipping 1-3 workdays

€2.19 *