Discus 2c 18M

13313
€29.99 *

Prices per unit incl. VAT plus shipping costs

Shipping 1-3 workdays

Surcharge

Option name
Price
Price incl. Surcharges
€0.00*
Gliding is fun The Discus 2c 18 m was made from original data with the support of Schempp... more

Gliding is fun
The Discus 2c 18 m was made from original data with the support of Schempp Hirth, except for the change for the Vector Unit section and the adjustment of the wing to tailplane adjustment angle, all this is the 100 percent reduction of the 3-side view. The imprint on this model was created from original images of the aircraft, even the cockpit area with pilot is 1: 1 from the original. The spar reinforcements are made from the Spaltabdeckband the man-carrying aircraft. The model is made of Vector Board and is printed, cut and packed here in Germany.

Fun for the evening at the airfield

If you are several pilots, you can also have a small OLC competition. Represents two turnflags no. 168522 at a distance of 50 m, that's the course you have to fly.
1.) Choose the throttle setting so that the model with its fully charged battery just holds the height and can control it well.
2.) On the trigger switch of the mz-4 remote control you have full throttle, if you use the trigger switch, must be circled, so thermals fly.
3.) Release trigger switch, then go back on track
4.) The one who made the most laps wins.
That's fun.

Use the Vector Unit from other models, such as Emma or Leo, replace the propeller with the propeller with the A so that the propeller points forward and blows backwards then it can start.

Flying and flight characteristics:

The model has very good flight characteristics.
The position of the Vector Unit is chosen so that the model can be controlled easily and easily.

The focus:

Is set so that the model with about full throttle reserves the nose up and rises slightly. If you take out the gas, the model airplane goes into a slight curve and slides to the ground.

Tuning:

For more power you can tune the Vector Unit with the Extreme Motor No.34001.4 and the new 220 mAh battery No.78102.1 and use the same propeller as before.

Assembly:

Assembly is limited to attaching the Vector Unit using tape strips (both not included in the kit) applying the self-adhesive rail reinforcement (please refer to the video instructions), inserting the wings, attaching the elevator to the fuselage.


The model Dicus 2c 18m:
  • Great prototypical flight image
  • Scale look through photo printing
  • Very robust by Vector Boards
  • Quick assembly without glue

Kit content:
  • 1x fuselage, 8 mm Vector Board
  • 1x wing, 3 mm Vector Board
  • 1x tail wing, 3 mm Vector Board
  • 2x reinforcement bars 700x6x0,35mm

Required accessories
  • No. 34002 Vector Unit
  • No. S1031 mz-4 HoTT

Related links to "Discus 2c 18M"
Technical information
Weight [g]: 34
Height [mm]: 80
Overall length [mm]: 400
Wingspan [mm]: 1020
V-10 V-10

Shipping 1-3 workdays

€17.99 *
Free-Flight Model »Der mini UHU« 725 mm Free-Flight Model »Der mini UHU« 725 mm

Shipping 1-3 workdays

€19.99 *
Radio Control mz-4 HoTT, 2 Channel Radio Control mz-4 HoTT, 2 Channel

Shipping 1-3 workdays

€24.99 *
NEW
Focke Wulf 190 Focke Wulf 190

Out of stock

€17.99 *
NEW
P 51 Mustang Louisiana Kid P 51 Mustang Louisiana Kid

Out of stock

€17.99 *
Ka8b Jana Ka8b Jana

Shipping 1-3 workdays

€6.99 *
Discus 2a Discus 2a

Shipping 1-3 workdays

€29.99 *
AMIGO IV ARTF RC Gliding Aircraft 2000 AMIGO IV ARTF RC Gliding Aircraft 2000

Shipping 1-3 workdays

€204.99 *
HGR Alien Rocket HGR Alien Rocket

Shipping 1-3 workdays

€9.99 *
Discus 2b Discus 2b

Shipping 1-3 workdays

€29.99 *
NEW
Hawker Seafury Royal NAVY Hawker Seafury Royal NAVY

Shipping 1-3 workdays

€17.99 *
Ka8b Jana Ka8b Jana

Shipping 1-3 workdays

€29.99 *
Vector Plane Leo Vector Plane Leo

Shipping 1-3 workdays

€13.99 *
NEW
P-47 Thunderbolt Shell Pusher P-47 Thunderbolt Shell Pusher

Shipping 1-3 workdays

€17.99 *
NEW
Messerschmitt Bf 109 Messerschmitt Bf 109

Out of stock

€17.99 *
WP CHICO WP CHICO

Out of stock

€89.99 *
Ka8b Kristopher Ka8b Kristopher

Shipping 1-3 workdays

€29.99 *
Duck Duck

Shipping 1-3 workdays

€19.99 *
Vector Motor Extreme CW Vector Motor Extreme CW

Shipping 1-3 workdays

€7.99 *
1 Vector Plane Vector Wing, the Wing for Fun

Shipping 1-3 workdays

€19.99 *
Ka8b Kristopher Ka8b Kristopher

Shipping 1-3 workdays

€6.99 *
HGR Rusty Carl HGR Rusty Carl

Shipping 1-3 workdays

€9.99 *
Alien Rocket Alien Rocket

Shipping 1-3 workdays

€14.99 *
Sussie Speed Sussie Speed

Shipping 1-3 workdays

€14.99 *
Vector Motor Extreme CCW Vector Motor Extreme CCW

Shipping 1-3 workdays

€7.99 *
Vector Gear 1:6 Getriebeaufsatz Vector Gear 1:6 Getriebeaufsatz

Shipping 1-3 workdays

€6.99 *
Pteranodon green Pteranodon green

Shipping 1-3 workdays

€7.99 *
Jet-Model X-29 by Flite Test Jet-Model X-29 by Flite Test

Shipping 1-3 workdays

€46.99 *
1 Vector Boards 1000 x 300 x 0,2 mm 150 pcs

Shipping 1-3 workdays

€29.99 *
Vector Unit Mount Vector Unit Mount

Shipping 1-3 workdays

€3.29 *
USB charger SLIM 1501S 4,2V USB charger SLIM 1501S 4,2V

Out of stock

€7.99 *
Vector Motor CW Vector Motor CW

Shipping 1-3 workdays

€7.99 *
Vector Plane Witch Vector Plane Witch

Shipping 1-3 workdays

€15.99 *
V-Venture RC Electro Model Plane, RFH V-Venture RC Electro Model Plane, RFH

Shipping 1-3 workdays

€231.99 *
Pteranodon Pteranodon

Shipping 1-3 workdays

€5.99 *
HGR Racing Lilly HGR Racing Lilly

Shipping 1-3 workdays

€9.99 *
Duo Discus XL Duo Discus XL

Shipping 1-3 workdays

€34.99 *
Jule Jule

Out of stock

€4.99 *
Racing Lilly Racing Lilly

Shipping 1-3 workdays

€14.99 *