Electronic Speed Control (ESC) 3D BLHELI Copter Brushless ULTRA CONTROL 20A without BEC

S3057
€28.99 *

Prices per unit incl. VAT plus shipping costs

Shipping 1-3 workdays

Surcharge

Option name
Price
Price incl. Surcharges
€0.00*
The 3D Copter ESC The Graupner Ultra Control 20 A 3D has been optimized especially for 3D... more

The 3D Copter ESC
The Graupner Ultra Control 20 A 3D has been optimized especially for 3D Copters, eg the Graupner 3D Copter Alpha 300Q (Part No. 16530). The 20 A controller combines the highest quality components, the latest software, highest performance and minimum weight (15 g with cable).
The 20 A 3D uses the open source BLHeli software, version 14.2. The 20 A is currently the only open source flight controller with a built-in 50 MHz Silabs processor, whose updates and programming can be carried out via the Graupner update cable (item no. 7168.6). The strong Silabs processor is characterized by the high clock rate, which allows higher maximum speeds and precise timing at high speeds.
The Ultra Control 20 A features high-quality Power SO8 FET power amps. Special FET drivers guarantee an effective, active freewheel and cool the power amp. The field effect transistors of the Power SO8 are characterized by their low internal resistance of 1.6 mOhm. The Ultra Low ESR capacitors used guarantee super-fast reversal of rotation and super-fast start-up, as well as high operational reliability.
High-precision resistors ensure fast and precise engine start-up, and the preset Damped Light mode ensures extremely precise flight behavior.
The Graupner 20 A automatically detects normal (PPM) receiver pulses and OneShot Pulse. The
Servo paths and all other settings are already optimized for the Graupner GR-18 receiver and pre-set specifically for 3D Copter. The built-in receiver cable has a length of 50 mm. The speed limit for 2-pole motors is 400,000 rpm.


Characteristics:
  • Open Source BL Heli Software 14.1
  • Only open source ESCs with Silabs processor, updateable and programmable via the Graupner update cable No. 7168.6
  • New Silabs processor doubles the wire speed for higher maximum speeds and more precise timing at high speeds
  • High power SO8 FET condensators with low internal resistance 1.6 mOhm
  • Special fast FET drivers for more effective active freewheeling and cooler condensators
  • Ceramic capacitors for super fast start-up and high operational safety
  • High-precision resistors for faster and more accurate motor start
  • Damped Light mode preset for precise flight characteristics
  • Automatic detection for normal receiver pulses and OneShot mode
  • Preset servo travels and all other settings for the GR-18 and 3D Copter
  • Receiver cable 50 mm
  • Speed limit: 400,000 U / min with 2 pole motors

Related links to "Electronic Speed Control (ESC) 3D BLHELI Copter Brushless ULTRA CONTROL 20A without BEC"
Technical information
Dimensions approx. : 25 x 21 x 6
Dimensions with capacitor : 42 x 22 x 11
Battery plug connection: Cable
Operating voltage(V) language dependent: 7,4 - 15,2
Width [mm]: 22
Brushless: Yes
Max. continous current [A]: 20
Weight incl. leads [g]: 15
Height [mm]: 11
Overall length [mm]: 42
Max. continous current [A]: 20
Type: Opto
Cell count, LiPo, Lilo, LiFe: 2 - 4S
250 Multicopter Drive Set for Beginners 250 Multicopter Drive Set for Beginners

Shipping 1-3 workdays

€179.99 *
3D Copter Alpha 300Q HoTT - Finished Model 3D Copter Alpha 300Q HoTT - Finished Model

Shipping 1-3 workdays

€519.99 *
USB interface HoTT /GM-Genius USB interface HoTT /GM-Genius

Shipping 1-3 workdays

€28.99 *
Control ULTRA 7A BL Heli S 2-3S Control ULTRA 7A BL Heli S 2-3S

Shipping 1-3 workdays

€15.99 *
Empfänger GR18 S1019+XCELL 220 3mm CHAS. Empfänger GR18 S1019+XCELL 220 3mm CHAS.

Shipping 1-3 workdays

€109.99 *
ALPHA 170 3D ALPHA 170 3D

Shipping 1-3 workdays

€225.99 *
Quadrocopter Alpha 150Q FPV-Kamera, GPS Quadrocopter Alpha 150Q FPV-Kamera, GPS

Shipping 1-3 workdays

€399.00 *
AIO Copter FC m.HoTTRX + LED Control AIO Copter FC m.HoTTRX + LED Control

Shipping 1-3 workdays

€59.99 *
FPV micro PRO Camera PAL 160° IR blocked FPV micro PRO Camera PAL 160° IR blocked

Shipping 1-3 workdays

€34.99 *
ULTRA 2804 2300KV brushless Motor CW ULTRA 2804 2300KV brushless Motor CW

Shipping 1-3 workdays

€22.99 *
3D Copter Alpha 300Q Kit 3D Copter Alpha 300Q Kit

Shipping 1-3 workdays

€329.99 *
Receiver GR-18 +3xG + 3A + Vario HoTT Receiver GR-18 +3xG + 3A + Vario HoTT

Shipping 1-3 workdays

€169.99 *
Gyro Empfänger S1035+XCELL 220 4mm CHAS. Gyro Empfänger S1035+XCELL 220 4mm CHAS.

Shipping 1-3 workdays

€102.99 *
Quadrocopter Alpha 220Q FPV HoTT Quadrocopter Alpha 220Q FPV HoTT

Shipping 1-3 workdays

€419.99 *
AIO Copter FC m.HoTTRX +12V LED Control AIO Copter FC m.HoTTRX +12V LED Control

Shipping 1-3 workdays

€59.99 *
Flight Control OmniNXT F7 + SD BF Flight Control OmniNXT F7 + SD BF

Shipping 1-3 workdays

€59.99 *
Tricopter HoTT-Hornet 250 FPV CAM Tricopter HoTT-Hornet 250 FPV CAM

Shipping 1-3 workdays

€357.99 *
ULTRA 2809 1600KV Brushless Motor CCW ULTRA 2809 1600KV Brushless Motor CCW

Shipping 1-3 workdays

€24.99 * €19.00 *
Charger Ultramat 14 plus, Li, Pb, Ni Charger Ultramat 14 plus, Li, Pb, Ni

Shipping 1-3 workdays

€71.99 *
LiPo-battery V-MAXX20C 4/1300 14,8V XT-TA4 LiPo-battery V-MAXX20C 4/1300 14,8V XT-TA4

Shipping 1-3 workdays

€48.99 *
contr. BRUSHLESS CONTROL + T 18 BEC JR contr. BRUSHLESS CONTROL + T 18 BEC JR

Shipping 1-3 workdays

€58.99 *
NEW
LiPo Balancer Lader3-4S XH-Stecker LiPo Balancer Lader3-4S XH-Stecker

Shipping 1-3 workdays

€32.99 *
Radio Control mz-16 HoTT 16 Channels Radio Control mz-16 HoTT 16 Channels

Shipping 1-3 workdays

€749.00 *
Quadrocopter Alpha 220Q RTF Quadrocopter Alpha 220Q RTF

Shipping 1-3 workdays

€629.99 *
Propeller Gemfan Flash 3052-3 rot Propeller Gemfan Flash 3052-3 rot

Shipping 1-3 workdays

€3.49 *
GPS connection cableto S1039 50mm GPS connection cableto S1039 50mm

Shipping 1-3 workdays

€4.39 *