Flight Control OmniNXT F7 + SD BF

48377.NXT
€59.99 *

Prices per unit incl. VAT plus shipping costs

Shipping 1-3 workdays

Surcharge

Option name
Price
Price incl. Surcharges
€0.00*
The OmniNXT F7 is the top of the range flight controller based on the Omnibus F7 v2. It uses the... more
The OmniNXT F7 is the top of the range flight controller based on the Omnibus F7 v2. It uses the trusty MPU6000 Gyro with an additional ICM20608 on top. With the onboard damping box, the gyros run perfectly under 32k looptime. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. The NXT also comes with 2 different BECs and 6 UARTs.
OmniNXT F7 supports 3-6s LIPO direct input, built-in hall Current Sensor and Power Filter.
This FC is designed to be able to pair with one of the 4in1 ESCs to form a powerful combo, and also has pins for individual ESCs too.

Features:
  • F7 MCU processors
  • Two gyros onboard: MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz
  • 30.5x30.5mm Mounting holes
  • Supports 3-6S Lipo
  • Built-in 5V 1A BEC output (Buck)
  • Built-in 8V 1A BEC with LC filter output for the camera and VTX (Buck)
  • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
  • Built-in hall Current Sensor
  • More caps to reduce power noise
  • Port for easy connection to Airbot 4-in-1 esc (SH1.0 8P)
  • Solder pads added for SmartAudio and Camera Control

Related links to "Flight Control OmniNXT F7 + SD BF"
AIO Copter FC m.HoTTRX +12V LED Control AIO Copter FC m.HoTTRX +12V LED Control

Shipping 1-3 workdays

€59.99 *
AIO Copter FC m.HoTTRX + LED Control AIO Copter FC m.HoTTRX + LED Control

Shipping 1-3 workdays

€59.99 *
Receiver GR-18 +3xG + 3A + Vario HoTT Receiver GR-18 +3xG + 3A + Vario HoTT

Shipping 1-3 workdays

€169.99 *
Empfänger GR18 S1019+XCELL 220 3mm CHAS. Empfänger GR18 S1019+XCELL 220 3mm CHAS.

Shipping 1-3 workdays

€109.99 *
Flight One Control Revolt RF1 AIO F4 Flight One Control Revolt RF1 AIO F4

Shipping 1-3 workdays

€69.99 *
Quadrocopter Alpha 150Q FPV 3 Z. 3500KV Quadrocopter Alpha 150Q FPV 3 Z. 3500KV

Shipping 1-3 workdays

€299.99 *
Quadrocopter Alpha 150Q FPV-Kamera, GPS Quadrocopter Alpha 150Q FPV-Kamera, GPS

Shipping 1-3 workdays

€399.00 *
Radio Control mz-32 HoTT 32 Channels Radio Control mz-32 HoTT 32 Channels

Shipping 1-3 workdays

€999.99 *
controller 4 in 1, 20x20mm controller 4 in 1, 20x20mm

Shipping 1-3 workdays

€79.99 *
Flightone Millivolt V3 RF1 AIO F4 with OSD Flightone Millivolt V3 RF1 AIO F4 with OSD

Shipping 1-3 workdays

€44.90 *
GPS connection cableto S1039 50mm GPS connection cableto S1039 50mm

Shipping 1-3 workdays

€4.39 *
3D Multicopter High-Power Drive Set 3D Multicopter High-Power Drive Set

Shipping 1-3 workdays

€219.99 *
receiver GR-16 HoTT2.4 GHz 8 channel receiver GR-16 HoTT2.4 GHz 8 channel

Shipping 1-3 workdays

€78.99 *
receiver GR-12SH HoTT 2.4 GHz +3xG 6 K. receiver GR-12SH HoTT 2.4 GHz +3xG 6 K.

Shipping 1-3 workdays

€61.99 *
NEW
Copter Graupner UAV G 5000 BioVector Copter Graupner UAV G 5000 BioVector

Shipping 1-3 workdays

€3,999.00 *
Gyro Empfänger S1035+XCELL 220 4mm CHAS. Gyro Empfänger S1035+XCELL 220 4mm CHAS.

Shipping 1-3 workdays

€102.99 *
Propeller Gemfan Flash 2540-3 gelb Propeller Gemfan Flash 2540-3 gelb

Shipping 1-3 workdays

€3.49 *
tool for Graupner transmitter trim nuts tool for Graupner transmitter trim nuts

Shipping 1-3 workdays

€24.99 *
FPV transmitter Raceband  5,8 GHz 25 mW FPV transmitter Raceband 5,8 GHz 25 mW

Shipping 1-3 workdays

€39.99 *
3 inch propeller protection for Alpha 150 3 inch propeller protection for Alpha 150

Shipping 1-3 workdays

€7.99 *
Propeller Gemfan Flash 3052-3 rot Propeller Gemfan Flash 3052-3 rot

Shipping 1-3 workdays

€3.49 *
Smartphone holder for Graupner HoTT radios Smartphone holder for Graupner HoTT radios

Shipping 1-3 workdays

€49.99 *
SWEEPER Kit HoTT Droneball white SWEEPER Kit HoTT Droneball white

Shipping 1-3 workdays

€299.00 *
Servo DS480 for Husky Wing Servo DS480 for Husky Wing

Shipping 1-3 workdays

€22.99 *