Order number: 13400.C
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Price incl. Surcharges
Ready for the next level The HoTTrigger 1400S COMPETITION is the facelift version of the... more
Ready for the next level h2>
The HoTTrigger 1400S COMPETITION is the facelift version of the HoTTrigger 1400S. Like its predecessor, it is an electric aircraft model made of solid-foam. The model was designed and tuned exclusively for aerobatics.
From the EXTRA 330SC and EDGE 540 constructions, the advantages of the design, in terms of flight characteristics, were filtered out and used in the HoTTrigger 1400 S.
With the RC-model HoTTrigger you can have fun, no matter if you are a professional pilot or a beginner in aerobatics. The Motorflieger is the perfect training model for beginners in aerobatics or the intermediate model for every professional.
Revised 800 kV motor with 5 mm shaft, shaft retaining ring, motor mounting bolts additionally countered with stop nuts and more stable propeller driver.
All control surfaces are equipped with metal gear servos.
New attractive COMPETITION decals sheet, punched out with almost all recesses or partitions.
Spare parts, fuselage and wing now without electronics and motor, but provided with the necessary extension cables.
The Graupner HoTTigger 1400S COMPETITION can be excellently moved with ease both in the area of normal aerobatics and in 3D aerobatics. The revised motor provides a bit more power and easier handling in the figures. The revised servos provide higher precision and a higher roll rate on the aileron.
The wings are fastened to the fuselage with the two proven quick-release fasteners and the model is already built on the airfield, which is very pleasant in winter, "as it screwed badly with cold fingers". The generously designed battery compartment makes the model very suitable for everyday use and easy to handle.
The model can be assembled in a short time without much effort and be styled with the enclosed two different decor sets according to your wishes. Assembly time approx. 10 min, glue on the decor 30-45min, depending on the decal sheet. Color the pilot's bust.
The assembly is limited to the attachment of the chassis, the tail, tail wheel, canopy, pilot bust, receiver installation and propeller / spinner assembly.
You can tune the model with a power pack LiPo 4S2P / 3200mAh No.78130.4, the small additional weight of 42g of the battery does not change the flight behavior noticeably, but is clearly noticeable in the longer flight time of about 2-3 minutes.
Great flight figure
Very robust and suitable for everyday use
Quick assembly without glue
Wing with quick release without screws
Great, eye-catching fantasy designs
Light foam pilot bust
- Great flight figure
- Fully aerobatic
- Very robust and suitable for everyday use
- Quick assembly without glue
- Wing with quick release without screws
- Great, eye-catching fantasy designs
- Aluminum suspension
- Light foam pilot bust
Included in the set:
- 1x fuselage
- 1x wing halves
- 1x elevator
- 1x rudder
- 1x cabin hood
- 1x aluminum main landing gear mounted
- 1x tail wheel
- Plastic ball joints with brass ball
- Bolts, stop nuts, finished tapered rudder rods
- Decal sheet COMPETITION
- Decals IRON
- Pilot bust Acro Klaus
- Remote Control mz-12 PRO HoTT, DE, 12 Channel & Receiver Falcon 12 (No. S1002.PRO.DE)
- Receiver GR-12 HoTT, 2.4 GHz, 6 channels (No. 33506)
- Power Pack LiPo 4S / 2200 mAh, 14.8V, 70C, XT-60 (No. 78122.4)
- Power Pack LiPo 4S / 3200 mAh, 14.8V, 30C, XT-60 (No. 78130.4)
Related links to "Aerobatics - Model HoTTrigger 1400S Competition"
|Overall height [mm]:||370|
|Tailplane section:||NACA 008|
|Overall length [mm]:||1350|
|Material:||Graupner SOLIDPOR® Rigid|
|Wing section :||NACA 63-A mod|