Order number: 13410.44
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Price incl. Surcharges
Water Setup for Husky 1800 - pre-order at your retailer Ever thought about using an RC... more
Water Setup for Husky 1800 - pre-order at your retailer
Ever thought about using an RC hydroplane? Here ist he perfect accessory for this!
The Graupner Husky 1800S Floaters SET has been specifically designed for the Graupner Husky 1800S. The components made of SOLIDPOR® hard foam, plastic parts and aluminum pipes are stable and at the same time very light. Due to the low weight, the higher air resistance in flight is hardly noticeable.
After the Graupner Husky 1800S float set has been screwed together, the assembly on the airplane model is only the dismantling of the main gear, the screwing of the floats on the fuselage, the tensioning of the tensioning cords and the mounting of the rudder linkage on the rudder.
The tightening and tensioning of the floats takes approx. 15 min. This, however, has to be done only once. Afterwards, the complete set can be mounted and disassembled on the fuselage. The conversion takes about 5 min
Husky 1800S ARTF (No. 13410)
Husky 1800S (No. 13410.100)
There is the possibility to install separate servos in the floats, to direct the rudders individually for each float.
- Very easy
- Scale optics
- Quick and easy installation
- No additional servo required
- Optionally, additional servos can be installed
The set contains
- Float couple
- Aluminum support
- Mounting material
- Servo digital DES 47 8 BB MG 12 mm (No. 7917)
- 2x Extension cablel GOLD 500 mm (No. 3935.50)
Related links to "Husky 1800S Floats Set"
|Overall length [mm]:||840|
|Material:||Graupner SOLIDPOR® Rigid Foam|