Charger Polaron V2.103

Ladegeräte Polaron 
S2001-R_Polaron_EX_Combo_red_engS2002_Polaron_AC_DC_blau_update Version:

Firmware_V2103
PC_Software_V1.2

Changes:

 Firmware Update for the Polaron Charger. With this Firmware the WiFi App works.

Suitable for: 

- Polaron EX
- Polaron EX1400
- Polaron PRO

Changes from 25 September 2017
PC Software Version 1.2 added
A baud rate of 115200 baud must be set

Tags: Polaron
Please enter these characters in the following text field.

The fields marked with * are required.

  • Not work with Graupner_Charger_Monitoring Suite

    After update to version 2.100 Graupner Charger Monitoring Suite program not work. Do not go data from the charger.

  • Answer to "Not work with Graupner_Charger_Monitoring Suite"

    Hello Maksel,

    thank you for your comment.
    Here is a bug in the update version 2.100 and we will solve it as soon as possible.

    Kind regards

    Graupner

  • Polaron AC/DC - Monitoring Suite Still Doesn't Work

    I have latest Firmware installed but I'm not able to receive the log files and make charts with the monitoring suite. Any updates on this bug?

  • Answer "Polaron AC/DC - Monitoring Suite Still Doesn't Work"

    Hello Jörg,

    we are really sorry. There was a bug in the lastest Firmware for the Polaron.
    I would like to inform you that we have a solution. A colleague will get in touch with you and he will explain the solution

    Kind regards

    Graupner

  • charger monitoring still doesn't work

    well really like the charger, but still my polaron pro has the same problem as some others noted: no connection to monitoring suite :(

  • Answer "charger monitoring still doesn't work"

    Hello Daniel,

    we get in touch with you.

    @all
    If your Monitoring Suite does not work, please get in touch with our service department directly.
    They will help you and transmit a solution.

    Thank you

    Kind regards

    Graupner

  • Do not upgrade to v2101 if you need to use Monitoring Suite

    There is a bug in the firmware update that prevents the charger from communicating with the PC. I tested my charger (running on v2101) with versions 1.2, 1.3, and 1.5 of the Monitoring Suite with the same results - the charger and PC do not communicate. The constant in all cases was the firmware version installed in the charger which indicates this is where the problem resides. Note that prior to updating the charger, the PC and charger communicated and Monitoring Suite functioned properly.

    PolaronUSA has confirmed there is a bug and are waiting for the fix from Germany.

  • Regarding Monitoring Suite

    As Mark has written before, there is a software bug that prevents the charger from communicating with the PC propely.
    We are working on it with high presure.

    As soon as we have a solution, we will post a new Update.

    If you need the monitoring suite, do not uptdate and stay with the old version.

    Kind regards,

    Graupner

  • Graupner_Charger_Monitoring Suite problem solved

    I have solved this problem. From PC_Software_V1.2 I take file called "Graupner_Charger_2017_08_31.cpf" and rename it to "Graupner_Charger_Profiles.cpf" and put it in the main directory grstudio 4.7 ( replace old one ). Then start Graupner_Charger_Monitoring Suite v1.5. It fine work for my Polaron EX1400 with Firmware Master 2.101 Slave 2.102 on Windows 10,

  • Polaron Pro problem hours and date

    hello, the date and time of my pro polaron does not stay in memory.
    every time I turn it on the time and the date resets; however the name of the user I have saved remains in memory.
    Is this normal?
    Do you have a solution ?

  • Answer "Polaron Pro problem hours and date"

    Hello Mr Rothstein,

    maybe the memory battery is empty. You can send the charger for inspection to our service department.

    Kind regards

    Graupner

  • Resource Upgrade does not work

    Getting Flash failure notice

  • Answer "Resource Upgrade does not work"

    Hello Mr Cox,

    either the driver is not installed or you selected the wrong software.

    Kind regards

    Graupner

  • problem innstalling WIFI moduel, and uppgrade to new firmware

    Originally Posted by Graupner USA
    Have you update your Polaron firmware to the latest version?
    Hi im trying , but get this error message:

    Model Data Mismatch
    Current Model ID: 0008
    Log File ID: 0001

    PolaronEX_1400_2a101_stm_170320_English

    2.101_a

    POLARON EX1400

    I only have the main? 1.MAIN
    ImagesView all Images in thread
    Name: error logg file typ.PNG
    Views: 0
    Size: 11.8 KB
    Description: Views: 0

    Name: error logg file typ.jpg
    Views: 0
    Size: 20.5 KB
    Description: Views: 0


    Today, 12:24 AM
    #416 Report
    Krisz
    Registered User
    0 km from you in
    Norway, Oslo
    Joined Aug 2015
    101 Posts
    Quote:
    Originally Posted by Krisz
    Hi im trying , but get this error message:

    Model Data Mismatch
    Current Model ID: 0008
    Log File ID: 0001

    PolaronEX_1400_2a101_stm_170320_English

    2.101_a

    POLARON EX1400

    An do i use the GraupnerSJ_Charger_Monitoring_Suite_Ver1.2 I have installer the CP210xVCPInstaller_x64 it comes on port COM9

    I only have the main? 1.MAIN

    wait its both right, main and slave in the Polaron EX 1400
    Last edited by Krisz; Today at 12:34 AM.
    Today, 01:24 AM
    #417 Report
    Krisz
    Registered User
    0 km from you in
    Norway, Oslo
    Joined Aug 2015
    101 Posts
    i also got the PC_Software_4.7. ? is this betther?


    So how to cgange det logg to Model ID: 0008

  • Answer "problem innstalling WIFI moduel, and uppgrade to new firmware"

    Hello Mr Zielinski,

    we are sorry. We can not give you an answer.
    Please get in touch with Graupner USA.

    https://www.graupnerusa.com/

    Thank you

    Graupner

  • Polaron charger don't work with monitoring software

    Unfortunately, the polaron ex 1400 charger doesn't work with the monitoring software...

  • Answer "Polaron charger don't work with monitoring software"

    Hello Angelo,

    we know that the Polaron do not work with the monitoring software. Our technical department is looking for an solution with the next update.

    Kind regards

    Graupner

  • Unfurtunate news

    Just got the 1400 charger and is an excellent charger and was very much looking forward on using the pc software to monitor the batteries but unfortunately it does not work!, Any updates on the fix? or any workaround to make it work?

  • Answer "Unfurtunate news"

    Hello Guillermo,

    we know the bug and we will work on it.

    Kind regards

    Graupner

  • Updated my Polaron Ex and it is working

    Updated my Polaron Ex and it is working with Monitor suite.

    Here are my steps hope it can be useful
    -Use grstudio 4.9 to update resource/main/slave from Polaron firmware V2101_20170516
    -Now Main is 2.101 and Slave is 2.102
    -I use Monitoring suite Ver1.2 (Graupner_Charger_Monitoring_Suite_Ver1-2_170831)
    -use included Graupner_Charger_2017_08_31.cpf file
    -select baud 115200
    -I'm using Windows 10

    Cheers

  • Balance Problem

    I have only use EX1400 for less than 2 months. I have update to the current firmware right after I have receive the unit. I use the charger mainly for RC Car which is 2 cell HV LIPO both standard and shorty size. The battery is from Arrow, 6000 mAH for shorty and 6600 mAH for standard size.

    After charging the battery for approx. 20 cycles, I have the issue that the battery become hot during charging and from the display it indicated that the volatage of the battery is not balance somce time different by .05V. I always charge with the the current rate of 1C and try 10A for 3 cycle inorder to test that the charger could work.


    One battery destroy after 22 cycle (become fat, i mean expand in size) The second one does not look good and will be damaged soon.


    For testing propose, I have swop my battery with friend's charger (while charging at my ex1400 the battery become hot), surprisingly on the other charger the battery is not hot at all.


    Please advise on what shall I do. Any recommendation on firmware, etc.


    Thanks Siri

  • Answer "Balance Problem"

    Hello Siri,

    thank you for your comment and your error discribtion.
    Please send the Polaron to our service department.

    Thank you

    Graupner

  • Polaron EX voltage calibration

    I started to notice even though I charge my 2 cell LIPO battery to 4.20 per cell the battery was coming off at 8.48 to 8.54 volts when checked with a calibrated fluke tester. I decided to update the firmware which I really struggled with as nothing i did seem to work. It didn't help the firmware software package was in German and the instructions weren't very clear on what to do. So I don't think I've updated it correctly and now it seem that the power supply screen is cycling on and off. Please help.

    Thanks
    Craig

  • Answer "Polaron EX voltage calibration"

    Hello Craig,

    please send your Polaron to our service departemt. There's something wrong with the power supply.

    Kind regards

    Graupner

  • Voltage Calibration

    Is there any chance to implement to software the funcionality:
    1) Voltage Calibartion
    2) IR measuring on not charged battery pack

  • IR and voltage calibration

    Voltage calibration is done in the factory. It can not be done by the user.
    IR measurement is only possible at charging or discharging.

Related products
Polaron EX Combo charger silver Polaron EX Combo charger silver

Shipping 1-3 workdays

€529.99 *
Charger POLARON EX1400 silver Charger POLARON EX1400 silver

Shipping 1-3 workdays

€459.99 *
Polaron AC/DC charger blue Polaron AC/DC charger blue

Shipping 1-3 workdays

€419.99 *