Radio Control-Set mz-24.PRO HoTT 12 Channel - 2v024

mz-24.PRO HoTT | #S1006.PRO
S1006-Pro_MZ_24_Pro_0158871760d6d9d  Version:

Version 2v024

mz-24.PRO_2v024_German
mz-24.PRO_2v024_English
mz-24.PRO_2v24_France
mz-24.PRO_2v24_Spain
mz-24.PRO_2v24_Italiano

Voice-Files

Voice3_mz24PRO_DE
Voice3_mz24PRO_EN
Voice3_mz24PRO_ES
Voice3_mz24PRO_FR
Voice3_mz24PRO_IT
Voice3_mz24PRO_NL

Other downloads:

- Firmware-Upgrade

Changes:


Version 2v024 from the 18 October 2017

- Error while saving triple rates corrected in new model memories
- It is now possible to save the encoder for the voice volume
- Error corrected when setting the value in the trimming step menu
- Variotone function completely restored
- DELTA WING / Wing Mixer SR >> HR added
- Motor stop adapted for servo reversal (Attention,checking necessary!)
- Display error for announce language files corrected
- Announcement error corrected in sequencer display
- Start screen shows mz.24.PRO

- Voice File in the language Dutch available

- Motor stop operate now global and is not depending on flight phase.
- Mode change just possible if no conncetion existing to the receiver
- no HF-monitoring in CRSF V2 mode

- Voice File "Voice" was updated in the language EN. An erros has been fixed.

Tags: mz-24.PRO
Please enter these characters in the following text field.

The fields marked with * are required.

  • Update

    Good.

    I see that there is update to 2021.

    What problems does it solve?

  • Answer to "Update"

    Dear Marc,

    the 2012 Update and Revision History is still in the development.
    We will inform you as soon as possible.

    Kind regards

    Graupner

  • Compatible with non-pro mz24?

    Is this compatible with thw non-pro mz-24?

  • mz24-mz24pro

    is it possibe to uppgrade the mz24 to pro?

  • Problem firmware

    Good.

    I have two issues with the mz-24 pro.

    The first is of little importance, the sound when starting is cut sometimes.

    Https://www.youtube.com/watch?v=NH92jPuO3gY

    The second, and much more critical ... when trying to set failsafe on channels 11 or 12, a system reset occurs.

    Https://www.youtube.com/watch?v=Fl54PkRpIJo

    This second incidence has been reproduced in another mz-24 pro. So it's a generic problem.

    Greetings.

  • Answer "Problem firmware"

    Hello Marco Castro,

    I would like to inform you that we know this bug and with the next update the problem will be resolved.
    We ask for a little patience.

    Kind regards

    Graupner

  • Voice-Files Multikopter

    When Voice-Files Multikopter?

  • Answer "Voice-Files Multikopter"

    Hello Ram,

    the voice files for multicopter will come with the next updates.

    Kind regards

    Graupner

  • Mz-24 to mz-24 pro firmware

    Graupner USA told me there would soon be a way to put the pro firmware on a standard mz-24 radio.
    Any update or timescale for this happening?

  • Answer to "Mz-24 to mz-24 pro firmware"

    Hello Andy,

    enclosed with the link you will find further details to the update to the mz.24.pro

    https://www.graupner.com/News/mz-24-Software-Update/

    Kind regards

    Graupner

  • Latest version?

    Ah, I should have been clearer.

    The method they mentioned was one that didn't require the radio to be sent back to you. They implied it was possible to self serve the update.

    Is this not the case?

  • mz

    this link https://www.graupner.com/News/mz-24-Software-Update/ for MZ-24 upgrade to PRO is not a solution, nobody wants to send their radios anywhere. When will you release standalone update software that we can download and just run the update?

  • Answer "Latest version?" & "mz"

    Hello Andy and Gigi,

    at the moment the update is just possible directly at the Graupner service department in Germany, Switzerland, Italy and France.
    It is not possible to buy the update at our Online Shop but also thank you for the idea and we will look what we can do in the near future.

    Kind regards

    Graupner

  • update

    Hello, tell me when there will be an update from mz 24 to PRo. Not the most correct approach of the company to make software updates paid, you can charge for accessories but not for software. I would very much like to put an update on mz 24 to pro. I await your soonest reaction!!!!!!

  • Answer to "update"

    Hello Mr Slava,

    the update from the mz-24 to the mz-24.Pro is available and can be occur at the Graupner Service departments in Germany, Italy, France and Switzerland.
    The update costs 50 Euro and you will get a new radio controll software with new and great features. The following updates will be free of charge again.
    You will find more information at https://www.graupner.com/mz-24-Update

    Kind regards

    Graupner

  • Mikrokopter voice

    Hi,
    Voice for mikropter is avalaible? I want to update my old transmiter MZ24 for a new MZ24 Pro, but I can´´t found mikrokopter voice for the new model.
    Thanks

  • Answer "Mikrokopter voice"

    Hello July,
    here is no Mikrokopter voice file available for the mz-24PRO from Graupner.
    If you need it, please contact Mikrokopter or tell us which voice files you need to have added to it.
    Kind regards
    Graupner

  • Missing options

    Hi,

    Now my MZ24 is updated to from pro here. https://www.graupnerusa.com/Firmware-updatemz-24-to-mz-24-PRO-1006.PRO.UPD.html.

    I still missing some options what other brands have.

    -Edit throtle curve whitout swich them on (no using throttlelimit).
    -Timer trigger ch 6. Like if there is -98% thrtole timer goes on and under that stops

    -Rauno

  • Answer "Missing options"

    Hello Rauno,

    enclosed the answers.

    -Edit throtle curve whitout swich them on (no using throttlelimit).

    Sorry, in the Graupner radios the limiter function is needed for this.

    -Timer trigger ch 6. Like if there is -98% thrtole timer

    This can be programmed.
    Move the CH6 in the clock menu clock start and set the wished starting position with enter.

    Kind regards

    Graupner

  • Timer trgger ch6????

    How? There is just sw options. And cant be changed manually. In heli mode throtle is not controlled by stick, it just straight line ex. 80-80-80.

  • Answer to "Timer trgger ch6"

    Hello Rauno,

    it just works with the support of the limiters. Unfortunately, we do not have an 200 Software entrance.

    You can trim the curve with a trim DT1 or DT2 on K9 (phase dependent) and free mixers in the K9 of 6 in the different flight phase.
    For further detailed questions please get in touch with our service directly and not via the update blog.
    The mail address is service@graupner.de

    Kind regards

    Graupner

  • Update 2.024

    1. Issue with auto time off. Once the auto Time off gets triggered you are not able to cancel it. It also appears to ignore the fact your are currently using the tx.
    2. Please can you tell me if there is a way of changing throttle curves with a live model? other brands allow this.
    3. Please can we have a way of assigning to adjusting the screen brightness, same as you have now done for voice alerts.
    I have just upgraded two of my original MZ24 to this new firmware and am loving the new features.

  • Answer "Update 2.024"

    Dear Craig,
    thank you very much for your feedback to the beta version 2.024.

    The information have been forwarded to our technical department.

    We do not understand the first question. Could you please let us know which set up you mean or please describe the question in detail.
    Issue with auto time off. Once the auto Time off gets triggered you are not able to cancel it. It also appears to ignore the fact your are currently using the tx.

    Kind regards

    Graupner

  • Update MZ24

    This version is compatible whit the MZ-24? the non pro version? i speak spanish and i want to know if i can install the spanish version to my MZ24 (normal). Thanks!

  • Answer "Update MZ24"

    Hello Federico,

    the update 2v019 or 2v024 is just suitable for the mz-24.Pro.
    So it is not possible to update your mz-24 with the Spanish version.

    Please check out the update blog for the mz-24
    https://www.graupner.com/blog/detail/sCategory/748/blogArticle/107

    Kind regards

    Graupner

  • Range issues

    since upgrading to pro on standard MZ-24 i have now got range issues the model will get 20 feet away then the transmitter goes to no signal wait about 30 seconds then is fine for a min then goes again. It was all fine till update done

  • Answer "Range issues"

    Hello Colin,

    thank you for your comment.
    You did your upgrade to the mz.24.pro with the web-based version from Graupner USA.
    So please get in touch with Graupner USA. They will support you as well.
    Here you find the link to the support contact https://www.graupnerusa.com/REPAIRS-AND-RETURNS_ep_54-1.html

    Kind regards

    Graupner

Related products