Radio Control mc-16 HoTT 8 channels - Version 2v021

mc-16 HoTT | #33016

mc-16_eng
Version: mc-16_2V021_DE
mc-16_2V021_EN
mc-16_2V021_ES
mc-16_2V021_FR
mc-16_2V021_IT
mc-16_2V021_NL     
Download Voice-Files

Voice3_DE
Voice3_EN_Global
Voice3_EN_Imperial
Voice3_FR
Voice3_ES
Voice3_IT
Voice3_NL
Voice3_CZ

Download Voice-Files  Multicopter

Voice3_Multicopter_DE
Voice3_Multicopter_EN

Other downloads:  - Handbuch, Manual, Manuel
- Firmware-Upgrade
Changes:


Changes from 11.01.2018 2v021:

- Binding Problem (only American Country Code) fixed. 

Changes from the 17 July 2017

Voice File "Voice3" was updated in the language English. An error has been fixed.

Version 2v018 and Voice-File 3 from the 14th November 2017

- Announcements for flight phases (Voice outputs for phases, not with mx-12 / 16)
- Announce-menu (Voice output by switch, phases should be announced in the phase menu, not above announce.)
- RX date (Slower telemetry for crawl operation or camera copter especially for the secondary receiver.
- Alarm setup: User/Vario/OFF // Benutzer/Vario/Aus
- Altitude Warning ON/OFF // H├Âhenwarnungen EIN/AUS

For instructions on the new functions, please refer to the mc-28 manual part 2

Specials: Update should be made with Firmware-Upgrader >=V4.0
Attention:

After the update, the Voice3 language file must be updated in order for voice output and warnings to work.

A complete function and range test so as a flight simulation on the ground should be performed before the first flight of each model!

It is recommended to delete the binding of the receiver firstly and then bind newly the receiver to the model memory.

Model memories will be saved.

Tags: mc-16
Please enter these characters in the following text field.

The fields marked with * are required.

Related products