Radio Control mc-20 HoTT 12-channels - Version 2v021

mc-20 HoTT | #33020

mc-20_eng 
Version:

Version 2v021 from 11th January 2018

mc-20_2v021_DE
mc-20_2v021_EN 
mc-20_2v021_FR 
mc-20_2v021_ES 
mc-20_2v021_IT 
mc-20_2v021_NL 

Download Voice-Files

 Version 2v018 from 11th January 2018

Voice3_DE
Voice3_EN_Global
Voice3_EN_Imperial
Voice3_FR
Voice3_ES
Voice3_IT
Voice3_NL
Voice3_CZ

Download Voice-Files  Multicopter Voice3_Multicopter_DE
Voice3_Multicopter_EN
Other Downloads: - Handbuch, Manual, Manuel
- HoTT - Software (Firmware-Upgrade)
Changes:

Version 2v021 from 11th January 2018

- Binding problem (only Amercican RF code) fixed

Version 2v018 from 14th November 2017

- Announcements for flight phases (Voice outputs for phases, not with mx-12 / 16)
- Announce-menu (Voice output by switch, phases should be announced in the phase menu, not above announce.)
- RX date (Slower telemetry for crawl operation or camera copter especially for the secondary receiver.
- Alarm setup: User/Vario/OFF // Benutzer/Vario/Aus
- Altitude Warning ON/OFF // Höhenwarnungen EIN/AUS

For instructions on the new functions, please refer to the mc-28 manual part 2

Special: Update should be made with the Firmware Upgrade
Attention:

After the update, the Voice3 language file must be updated in order for voice output and warnings to work.

Perform a complete function and range test so as a flight simulation on the ground before the first flight of each model!
It is recommended, the binding of the receiver to delete firstly and then bind the receiver
to the model memory.

Model memories will be saved. 

Tags: mc-20
Please enter these characters in the following text field.

The fields marked with * are required.

  • ?

    There must be something wrong, I can`t download the voice-files

  • Answer "?"

    Hello Mr Dalen,

    the files are working well. Unfortunately it is not possible to open the file with the Internet Explorer 11.
    Please try it with another browser.

    Thank you

    Graupner

  • update doesn't work

    When I try to update the transmitter it gives me an error. Packet start flag mismatch.
    How can I fix this? I've followed all the instructions from videos

  • Update problem

    With this short description, we can not help, why this error happens.
    You may update the radio over the SD-card. This is maybe more simple and faster. Please read the manual how to use the hidden mode and copy the update file and new voice files to the SD-card before.
    If this can not solve you problem, please contact our service at service@graupner.de