Radio Control mc-32 HoTT 16 channels - Version 2v018

mc-32 HoTT | #33032, 33032.PRO, 33033
 mc-32_eng Version:

Version 2v018 from 15th November 2017

mc-32_2v018_German
mc-32_2v018_English
mc-32_2v018_France
mc-32_2v018_Italiano
mc-32_2v018_Spain
mc-32_2v018_Dutch

Download Voice-Files

Version 2v018 from 15th November 2017

Voice3_DE
Voice3_EN_Global
Voice3_EN_Imperial
Voice3_FR
Voice3_IT
Voice3_ES
Voice3_NL

Download Voice-Files Multikopter

Voice3_Multicopter_DE
Voice3_Multicopter_EN

Other downloads:
 
- HoTT - Software (Firmware-Upgrade)
Changes:

Version 2v018 from 15th November 2017

- Announcements for flight phases (Voice outputs for phases, not with mx-12 / 16)
- Announce-menu (Voice output by switch, phases should be announced in the phase menu, not above announce.)
- RX date (Slower telemetry for crawl operation or camera copter especially for the secondary receiver.
- Alarm setup: User/Vario/OFF // Benutzer/Vario/Aus
- Altitude Warning ON/OFF // Höhenwarnungen EIN/AUS

For instructions on the new functions, please refer to the mc-28 manual part 2

Specials:  Update should be made with Firmware-Upgrader 
Attention:

After the update, the Voice3 language file must be updated in order for voice output and warnings to work.

A complete function and range test so as a flight simulation on the ground should be performed before the first flight of each model!

It is recommended to delete the binding of the receiver firstly and then bind newly the receiver to the model memory. Model memories will be secured

Tags: mc-32
Please enter these characters in the following text field.

The fields marked with * are required.

  • voice announcements

    When will there be an upgrade to include voice announcements for the MC-32?

  • Answer to "voice announcements"

    Hello Mr. Murphy,

    we are still testing the update and solve some issues.
    Please have a little patience.

    Thank you in advance

    Graupner

  • Need the flight phase announcement

    Hello, I need the Italian version for the last beta software, the possibility to hear the flight phase is awesome.
    Regards

  • Answer "Need the flight phase announcement"

    Hello Alessandro,

    the beta version 2v017 is now available in the language Italiano.

    Kind regards

    Graupner

  • Bluetooh headset

    Good!

    With version 2.0.17, on the mc-32 pro, when you turn the transmitter off and on, the bluetoothh headset does not pair.

    You have to do it by hand.

    I tested it with two headphones, one samsung and s530 (chinese).

    Regards!

  • Answer "Bluetooh headset"

    Hello Marc,

    thank you for your information.
    Our technical department will check this.

    Kind regards

    Graupner

  • Voice Announcements

    Thank you for this great enhancement, keeps Graupner up with software developments in radio control.

  • Release date

    Hi!

    Do you have an estimate on when the new version will be release to market?

    Is there any bugs that might bring the plane down, or is this a "safe" beta?

    Kind regards,
    Trond Dalsveen

  • Answer "Release date"

    Hello Mr Dalsveen,

    until now we know only about one bug in this beta firmware.
    You should not use two mc-32 in wireless teacher pupil mode. You may use the mc-32 with other Graupner radios in teacher pupil mode without problems.

    At the moment we can not tell you exactly when the final version will be published.

    Kind regards

    Graupner

  • V1.107 files

    Hello

    Can you add links to the Mc32 update page for the v1.107 files please, currently only the beta ones are there
    Thanks
    Chris

  • Answer "V1.107 files"

    Hello Chris,

    you will find the version 1.107 with a click on the country flags.

    Kind regards

    Graupner

  • mc-32

    I did make the uppdate whit no problem but now there is a problem whit all the servos on my transmitters ex if a throttle up the servo will go upp to the middle off the curve then it will go back on its first position .so the servo will first go upp the go down ?
    what has happen to the transmitter ?
    kenny

  • Answer "mc-32"

    Hello Kenny,

    I have a question to your problem. Does your servo go up and down just if you switch on your receiver or during the operation.
    If the problem is during the operation than your servo testing is active.

    Kind regards

    Graupner

  • mc-32


    Hi, that's when I use the radio controls as the servon moves in half a motion. they can not do the whole movement but go back after half a row

  • Answer "mc-32"

    Hello Kenny,

    we are really sorry. We can not help you from far away.
    Your mc-32 works not normal. Please send your radio control for a inspection to one of our service departments.
    You will find the service departments here. https://www.graupner.com/Graupner-Service

    Kind regards

    Graupner

  • mc-32

    i just did a down grade of the firmuppgrade and now all is working fine again.
    I cant make the new uppgrade.

  • Wrong link to manuals MC-32

    Hello, the link to download manuals for the MC-32 radio is wrong. Please correct

  • Answer "Wrong link to manuals MC-32"

    Hello Alessandro,

    sorry for the wrong link.
    Please find the manual in your language here.
    https://www.graupner.com/Tray-Radio-Control-mc-32-HoTT-DE-16-Channels/33032.77/

    Kind regards

    Graupner

  • new firmware 2v018 + Audio files (ES)

    Hello,

    The file “Voice_3_ES.vdf” display message: Voice Data Version Mismatch. Please, check it and solve this bug.

    With my MC-32 updated with the file "mc-32_2v018_ES.bin" I can read in the Main Menu a option: Anuncian, and it should be: Anuncios, or better yet, the correct word is: Locuciones.

    Thank you in advance.

    Manolo B.

  • Answer "new firmware 2v018 + Audio files (ES)"

    Hello Manuel,

    we are sorry that we upload the wrong file. Now you will find the correct file and I already sent you the file via mail.

    Kind regards

    Graupner

  • tsechische voice

    MC-32
    Alles wäre in Ordnung, aber wenn der Sender in der Tschechischen Republik verkauft wird, warum ist dann nicht die tschechische Sprache in der Software ???

  • V2.018 and voice3_FR

    hello,
    I did not make the update since 2014,
    1°/ my MC32 (buy in 2012) is in v1.041: please, is it possible to ditectly update in last version v2.048?
    2°/ when I click on link voice3-FR the file is not downloaded, but its code is edited?
    These updates are they really necessary?
    thank you for help
    JY

  • Answer "V2.018 and voice3_FR"

    Hello Mr Parlant,

    1° Yes you update the latest software
    2° Currently the downloads can not be opened with the Internet Explorer 11. Please try to download the file with another browser.

    Kind regards

    Graupner

Related products
Tray Radio Control mc-32 HoTT, DE, 16 Channels Tray Radio Control mc-32 HoTT, DE, 16 Channels

Shipping 1-3 workdays

€1,199.99 *
Tray Radio Control mc-32 HoTT, GB, 16 Channels Tray Radio Control mc-32 HoTT, GB, 16 Channels

Shipping 1-3 workdays

€1,199.99 *