Radio Control mx-12 HoTT 6 channels - Version 2v019

mx-12 HoTT | #33112 
mx-12_eng  Version:

Version 2v019 from 24th November 2017

mx-12_2v019_DE
mx-12_2v019_EN
mx-12_2v019_FR
mx-12_2v019_IT
mx-12_2v019_ES
mx-12_2v019_NL

Download Voice-Files

Voice3 from 16th November 2017

Voice3_DE
Voice3_EN_Global
Voice3_EN_Imperial
Voice3_FR
Voice3_ES
Voice3_IT
Voice3_NL

Download Voice-Files Multikopter Voice3_Multicopter_DE
Voice3_Multicopter_EN
Other downloads:

- Handbuch, Manual, Manuel
- Firmware-Upgrade

Changes:

Version 2v018 from 16th November 2017

- Announcements for flight phases (Voice outputs for phases, not with mx-12 / 16)
- Announce-menu (Voice output by switch, phases should be announced in the phase menu, not above announce.)
- RX date (Slower telemetry for crawl operation or camera copter especially for the secondary receiver.
- Alarm setup: User/Vario/OFF // Benutzer/Vario/Aus
- Altitude Warning ON/OFF // H├Âhenwarnungen EIN/AUS

Version 2v019 from 24th November 2017
- Correction of phase display for the copter model

For instructions on the new functions, please refer to the mc-28 manual part 2 

Specials:

Update should be performed with the  Firmware-Upgrader >=V4.0.
After the update to any V 1.7xx it is also possible with SD card ("Secret mode")

Attention:

After the update, the Voice3 language file must be updated in order for voice output and warnings to work.

A complete function and range test so as a flight simulation on the ground should be performed before the first flight!
It is recommended to delete the binding of the receiver firstly and then bind newly the receiver to the model memory


Model memories will be saved

Tags: mx-12
Please enter these characters in the following text field.

The fields marked with * are required.

  • Wireless trainer mode

    The v1.808 firmware has just one problem in wireless trainer mode: If the mx-12 is used as a pupil, it does not stop disconnecting and reconnecting.

    This problem does not occur in v1.807.

    Other than that, I did not notice any problems, it works perfectly.

  • Answer "Wireless Trainer Mode"

    Hello Alban,

    thank you for your comment.
    The problem will be fixed with the update version 2.017.
    The update will be published towards the end of the year or at the lastest in the beginning of 2018.

    Kind regards

    Graupner