Radio Control mx-16 HoTT 8-Kanal - Version 2v018

mx-16 HoTT | #33116
mx-15_eng  Version:

Version 2v018 from 16th November 2017

mx-16_2v018_DE
mx-16_2v018_EN
mx-16_2v018_FR
mx-16_2v018_ES
mx-16_2v018_IT
mx-16_2v018_NL

Download Voice-Files

Voice3 from 16th November 2016
Voice3_DE
Voice3_EN_Global
Voice3_EN_Imperial
Voice3_FR
Voice3_ES
Voice3_IT 
Voice3_NL

Download Voice-Files  Multikopter Voice3_Multicopter_DE
Voice3_Multicopter_EN
Other downloads:

- Handbuch, Manual, Manuel
- HoTT - Software (Firmware-Upgrade)

Changes:

Version 2v018 from 16th November 2017

- Announcements for flight phases (Voice outputs for phases, not with mx-12 / 16)
- Announce-menu (Voice output by switch, phases should be announced in the phase menu, not above announce.)
- RX date (Slower telemetry for crawl operation or camera copter especially for the secondary receiver.
- Alarm setup: User/Vario/OFF // Benutzer/Vario/Aus
- Altitude Warning ON/OFF // Höhenwarnungen EIN/AUS

For instructions on the new functions, please refer to the mc-28 manual part 2

Specials:


Update should be performed with the Firmware-Upgrader >=V4.0
After the update to any V 1.7xx it is also possible with SD card ("Secret mode")
Attention:


After the update, the Voice3 language file must be updated in order for voice output and warnings to work.

A complete function and range test so as a flight simulation on the ground should be performed before the first flight!
It is recommended to delete the binding of the receiver firstly and then bind newly the receiver to the model memory

Model memories will be secured

Tags: mx-16
Please enter these characters in the following text field.

The fields marked with * are required.

  • Voice file doesn't work.

    Voice3 file doesn't work. When trying to update MX-16 Hott (by graupner update studio or hide mode) the message is: wrong voice version

  • Answer "Voice file doesn´t work."

    Hello Mr Radoslaw,

    the mx-16 is just works only with the Voice file V2. Not with the Voice 3 file.

    Kind regards

    Graupner

  • Voice file doesn't work.

    Hmm... So, why this update was published in "Radio Control mx-16 HoTT 8-Kanal - V1.807" if it isn't intended for the MX-16 Hott?

    Regards
    Radoslaw

  • Answer "Voice file doesn't work."

    Hello Radoslaw,

    we did not communicated it clearly. We are really sorry.
    The voice file 3 is just suitable with the update version 2.017. The update version 2.017 exist just in a BETA-Version and is not yet published.
    If you like we can send you the BETA-Version for testing.

    Kind regard

    Graupner

  • Voice file doesn't work.

    Why not :-)
    I will test the integration of transmitter mx-16 with brain telemetry.

    e-mail: 8radzio@wp.pl

  • ???

    I am translating the voice file3 into Czech.
    These are reports 254 to 284.
    Is there a description?
    Special items 273-275

  • Answer "???"

    Hello Mr Tonda,

    I will get in touch with you via mail and I will attach some files.

    Kind regards

    Graupner