Receiver GR-24 HoTT - Version 7a03 & Beta 7a04

GR-24 HoTT | #33512
gr-24_eng  Version:

Version 7a03

Beta Version 
Version 7a04

Other downloads: - Handbuch, Manual, Manuel
- Firmware-Upgrade
Changes:

Version 3a90 from 27 June 2017
- Telemetry is faster

Version 7a03 from 08 February 2018
- New: SBUS signal output selectable
- Support for 32 channels channel mapping for mz-32
- Digital switch function for mz-32

Beta-Version 7a04 from 14 February 2018
- Ability to reset lost data packets with mz-32
- Digital switch function now also as level control High/Low at the servo outputs for direct use for LEDs or for direct control of transistors and switches.
SUMD V3 protocol added for the use of 32 channels + 64 switching channels
- SUMDIN Function added for receiver redundancy with SUMD out of a second receiver (at K7) for the receivers GR-16,24,32)

Attention: Default setting period time 10ms for GR-16,24,32

Special: The update should be performed with the Firmwareupgrader >3.7.
The update should be performed 2 times.
Thereafter perform a factory reset
Attention:

After the update a factory reset should be performed!
Push and hold the Bind-button then switch the receiver ON and wait about 3 seconds until the LED light up. Release the button.
Without the reset the servos might run to their mechanical end point!

A beta version of a program is an unfinished version that has already passed the alpha stage. Although the program can be used in its basic functions, it has not yet been fully tested for errors. So when using the beta you may experience crashes or bugs.

Tags: GR-24
Please enter these characters in the following text field.

The fields marked with * are required.

Related products
GR-24 receiver HoTT GR-24 receiver HoTT

Shipping 1-3 workdays

€112.99 *