Order number:
S3079
€19.99 *
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Surcharge
Option name
Price
Price incl. Surcharges
€0.00*
The aircraft speed controller for 1-2S LiPo without BEC The Graupner Ultra Control 10 A Race BL... more
The aircraft speed controller for 1-2S LiPo without BEC
The Graupner Ultra Control 10 A Race BL Heli S is the perfect speed controller for all multi-copters and race-copters with 1-2S LiPo but also especially suitable for indoor models with 1S. The 10 A Race combines a compact design, low weight, fast reaction times and optimized settings for race-copters.
The Ultra Control 10 A has the Open Source BLHeli S Software installed for standard servo pulse, Oneshot, Multishot and D-Shot 150, 300, 600. The aircraft ESC uses the modern 50 MHz Silabs processors. The processor has a clock rate two times faster than its predecessors. This grants higher maximum speeds as well as precise timing at high speeds.
The power amplifier is located in a 3.3 x 3.3 DFN package. The field effect transistors (FET) have a low internal resistance. Special FET drivers ensure a more active freewheeling and better cooling of the power amplifiers.
The ceramic and tantalum capacitors used allow fast start-up times and guarantee high operational safety.
The controller has pre-activated the Damped Light mode. This allows a more precise flight behavior.
The Ultra Control 10 A Race detects normal (PPM) receiver pulses but also OneShot, Multishot or D-Shot. The controller and the servo travel are already optimized for the GR-18 and the race copter settings. A 100 mm receiver cable is pre-installed.
The speed limit of the 10 A Race is 400.000 RPM with two-pole motors.
The 50 MHz Silabs processor of the 10 A can be updated and programmed using the Graupner update cable (No. 7168.6) and the included adapter.
Features
- Open Source BL Heli S software
- 50 MHz Silabs processor
- High quality DFN 3.3x3.3 EP FET power amplifiers
- Special FET drivers
- Ceramic and Tantalum capacitors, as well as suppressor diode for protection against over-voltages
- PPM receiver pulse, OneShot, Multishot And D-Shot Software available
- Servo travel and settings optimized for Graupner receivers
Related links to "Race Copter 10A Controller without BEC Brushless ULTRA CONTROL Race BL HELI S 1-2 S"
Technical information
Battery plug connection: | Cable |
Operating voltage(V) language dependent: | 3,7 - 7,6 |
Width [mm]: | 14 |
Brushless: | Yes |
Weight incl. leads [g]: | 6 |
Weight excl. leads [g]: | 2 |
Height [mm]: | 7 |
Overall length [mm]: | 27 |
Max. continous current [A]: | 10 |
Motor connection: | Lötanschluss |
Pulse frequency [kHz]: | 24 |
Type: | without BEC |
Cell count, LiPo, Lilo, LiFe: | 1 - 2 |
Available downloads:
NEW