Order number: S3080
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Price incl. Surcharges
The Race Copter Controller The Graupner Ultra Control 30 A Race BL Heli S is the ideal... more
The Race Copter Controller
The Graupner Ultra Control 30 A Race BL Heli S is the ideal controller for all multi-copters, in particular race-copters, which are used in FPV racing. The 30 A Race combines a compact design, low weight, fast reaction times and optimized settings for race-copter.
The Ultra Control 30 A has the Open Source BLHeli S Software installed for standard servo pulse, Oneshot, Multishot and D-Shot 150, 300, 600. The aircraft ESC uses the modern 50 MHz Silabs processors. The processor has a clock rate two times faster than its predecessors. This grants higher maximum speeds as well as precise timing at high speeds.
The power amplifier is located in a 3.3 x 3.3 DFN package. The field effect transistors (FET) have an extremely low internal resistance (typically <1 mOhm). Special FET drivers ensure a more active freewheeling and better cooling of the power amplifiers.
The ceramic and tantalum capacitors used allow fast start-up times and guarantee high operational safety.
The controller has pre-activated the Damped Light mode. This allows a more precise flight behavior.
The Ultra Control 30 A Race detects normal (PPM) receiver pulses, but also OneShot, Multishot or D-Shot. The controller and servo travel are already optimized for the GR-18 and the race-copter settings. A 100 mm receiver cable is pre-installed.
The speed limit of the 30 A Race is 400.000 RPM with two-pole motors.
The 50 MHz Silabs processor of the 30 A can be updated and programmed using the Graupner update cable (No. 7168.6) and the included adapter.
- Open Source BL Heli S software
- 50 MHz Silabs processor
- High quality DFN 3.3x3.3 EP FET power amplifiers with typically less than 1 mOhm
- Special FET drivers
- Ceramic and Tantalum capacitors, as well as suppressor diode for protection against over-voltages
- PPM receiver pulse, OneShot, Multishot and D-Shot Software available
- Servo travel and settings optimized for GR-18 and race-copter
Related links to "Race Copter 30A Controller without BEC Brushless ULTRA CONTROL Race BL Helis"
|Dimensions approx. :||27 x 14 x 8|
|Dimensions with capacitor :||27 x 14 x 8|
|Dimensions without cable:||27 x 14 x 8|
|Battery plug connection:||Cable|
|Operating voltage(V) language dependent:||7,4 - 14,8|
|Weight incl. leads [g]:||8|
|Weight excl. leads [g]:||4|
|Overall length [mm]:||27|
|Max. continous current [A]:||30|
|R DS on the FETs at 25°C:||typ. < 1 mOhm|
|Pulse frequency [kHz]:||24|
|Cell count, LiPo, Lilo, LiFe:||2 - 4S|