Order number: S3081
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Price incl. Surcharges
The Race Copter Controller for 2-6S LiPo The Graupner UltraControl 30 A Race BL Heli S is the... more
The Race Copter Controller for 2-6S LiPo
The Graupner UltraControl 30 A Race BL Heli S is the ideal controller for all Multicopter, especially Racecopter, used in FPV Racing. The 30 A Race combines a compact design, low weight, fast reaction times and optimized settings for Racecopter.
The UltraControl 30 A has installed the Open Source BLHeli S software for standard servo, oneshot, multishot and D-shot. The controller uses the modern 50 MHz Silabs processors. The processor has a twice as high clock rate compared to its predecessors. This guarantees higher maximum speeds as well as precise timing at high speeds.
The power amplifier is housed in a 5 x 6 housing. The field effect transistors (FET) have an extremely low internal resistance (typically 1.5 mOhm). Special FET drivers ensure a more active freewheeling and better cooling of the output stage.
The ceramic capacitors used allow fast start-up times and guarantee high operating safety.
The controller has pre-activated the Damped Light mode. This allows a more precise flight behavior.
The UltraControl 30 A Race detects normal (PPM) receiver pulses, but also OneShot, Multishot or D-Shot. The controller and servo travel are already optimized for the GR-18 and the Racecopter settings. A 100 mm receiver cable is pre-installed.
The speed limit of the 30 A Race is 400,000 RPM with two-pole motors.
The 50 MHz Silabs processor of the 30 A controller can be updated and programmed using the Graupner update cable (No. 7168.6) and the included adapter.
- Open source BL Heli S software
- 50 MHz Silabs processor
- High quality 5 x 6 FET power amplifiers with typical 1.5 mOhm
- Special FET drivers
- Ceramic and Tantalum capacitors, as well as suppressor diode for protection against overvoltages
- PPM receiver pulses, OneShot, Multishot and D-Shot software
- Servo settings and settings optimized for GR-18 and Race Copter
Related links to "Race Copter 30A Controller without BEC Bushless ULTRA CONTROL Race BL HELI S2-6S"
|Dimensions approx. :||40 x 18 x 7|
|Dimensions with capacitor :||40 x 18 x 7|
|Dimensions without cable:||40 x 18 x 7|
|Battery plug connection:||Cable|
|Operating voltage(V) language dependent:||7,4 - 22,8|
|Weight incl. leads [g]:||17|
|Overall length [mm]:||40|
|Max. continous current [A]:||30|
|Pulse frequency [kHz]:||24|
|Cell count, LiPo, Lilo, LiFe:||2 - 6S|