Order number: 16520.V2
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Just looking to upgrade Exclusively in the Graupner Online Shop arrives the Racecopter upgrade... more
Just looking to upgrade
Exclusively in the Graupner Online Shop arrives the Racecopter upgrade kit V2. The set consists of 2 main chassis plates, a middle chassis plate, 2 intermediate plates and 4 rubber bushes. In developing the new chassis, flowed the experience and the expertise of leading top pilots. The goal was to create an an absolutely Race-compatible upgrade kit that brings out the crucial fraction of seconds in the hard racing use.
The new Copter chassis consists of pure carbon and it is extremely resistant. Then it is now possible to engage in a slightly harder duel. The Alpha 250Q V2 Kit protects all electronic components, FPV camera, speed controllers, receiver and FPV transmitter in case of hard impacts and crashes. Good to know that not every small error means the end of the race. The chassis is significantly narrower designed. The great advantage of the upgrade package is a considerably lower air resistance. The copter becomes noticeably more dynamic.
An important point in developing the new chassis was that previous accessory components can continue to be used. This not only simplifies the transition, but it will also ensure that spare parts and tuning parts are available in big quantity.
The structure of the V2 chassis is very simple and easy designed. Thus, the upgrade is also ideal for beginners.
3D drawings (exploded-view) facilitate the conversion and guide accurately.
All RC components have simple but stable plug connections.
The chassis allows different configuration options - both fully symmetric and asymmetric construction variants are possible. With the upgrade kit the Copter can be built with a frame size of 210 mm (asymmetrical), 275 mm (symmetrical and asymmetrical, for 280 class Regulations) or 250 mm (asymmetrical or symmetrical). With a diagonal of 210 mm the copter is perfect for 5'' propellers; in the 250 version, symmetrical for 5'' or 5,5'' propellers, asymmetric for 6'' propellers; as 280 even the Graupner 6'' propellers can be used.
The structure is very flexible and so the copter weight can be varied from very light and maneuverable to extremely stable, depending on the race track and desire.
Even the lightweight 210 version is very stable and fully suitable for racing.
The Graupner Upgrade-Kit V2 is suitable for all Graupner Alpha 250Q Racecopter, e.g. the Race Copter Alpha 250Q FPV set V2 (No. 16520.FPV2). After the upgrade we recommend the use of the Graupner Race Copter brushless speed controller ULTRA CONTROL 20A Race without BEC (No. S3056), the voltage module with SBEC 22,2V (No. S8446) or the PDB with SBEC, voltage and current sensor & telemetry (No. S8474). Optimal propulsion is ensured by the Graupner ULTRA 2806 2300 KV brushless motors (No. S7049 and S7050). For a 210 setup we recommend the 210 arms for 5 inches propellers (No. 16522.10), for a 250 setup the 250 arms for 5 or 6 inches propellers (No. 16530.10) and for a 280 setup the 275 arms for 6 inches propellers (No. 16521.10).
Discover all for your Race Copter in Graupner Online Shop - from FPV - accessories, propellers, motors, batteries. Order at any time and equip yourself for the upcoming race.
- New, light design
- Plates of pure carbon
- Optimized for Racecopter
- Specially designed for racing
Included in the set
- 2 main chassis plates
- 1 middle chassis plate
- 2 intermediate plates
- 4 rubber bushes.
Related links to "Racecopter Alpha 250Q V2 upgrade kit"