Receiver GR-10C Copter Flight Control

S1029
€79.99 *

Prices per unit incl. VAT plus shipping costs

Shipping 1-3 workdays

Surcharge

Option name
Price
Price incl. Surcharges
€0.00*
Description: With the GRAUPNER HoTT 2.4 GHz technology, the 5-channel receiver has a new... more
Description:
With the GRAUPNER HoTT 2.4 GHz technology, the 5-channel receiver has a new high-frequency hopping telemetry transmission unit with modern components and the latest software. Without additional sensor systems, receiver voltage and temperature parameters, as well as signal strength, are transmitted.
With this receiver, it is now possible to control a Multicopter without using an external Flight Control. Through the associated elimination of additional electronics and cables can thus save weight, as well as the remaining components mounted tidy.
Integrated Flight Control is fully configurable via the HoTT telemetry, which significantly facilitates the setting. The system sets the control commands very accurately, what gives quickly a familiar feeling of flying especially in FPV Racing.
On the channel 5 can switch between 2 flight-modes, which allow depending on your preference in the Attitude mode (self-neutralizing situation mode), which limits the tilt at about 50 degrees, or in the Rate mode (also called acro mode) which allows flips and acrobatic figures. Here there is no angle limitation and can be controlled freely over each axis, as well as in a helicopter model.
With the simple control-learn function, the learning of the control channels a breeze. Once activated display all ESCs simultaneously control and teach directly to the throttle stick.
Through the channel 6> 110%, an automatic flip function can be activated. At the next roll or pitch command> 50% the Copter performs an automatic flip out in the specified direction.
The channels 7 and 8> 50% can be used as switching channels. Through the FETs e.g. LEDs or the DIP switch of the FPV transmitter can be connected.
With the simple controller-learn function, the learning of the controller way a cinch. Once activated display all ESCs simultaneously control and teach directly to the throttle stick.
Maximum performance and stability is obtained by adjustment of the ratio of the roll-sensitivity to Nick-sensitivity in unbalanced Multicopters. Similarly, a gas-dependent Gyro-limit can be continuously adjusted in order to achieve a high sensitivity but with strong drives.
The following Multicopter types are supported:
Quadro X, Quadro +, V Hexa, Hexa I, Tri L, Tri R
This gyro receiver is used to control multicopters. By update, the receiver can also be used as a flybarless system for mini-helicopters up to 200 mm with rear brush motor, brushless rear engine or tail servo or as a surface gyroscope for indoor models.
The motor and servo connectors are JST-SH connectors.


Other features:
  • Very direct feeling of control by eliminating the additional transmission path for Flight Control
  • Space saving, because the Flight Control and the necessary cables disappear
  • Quick and easy gyro assignment
  • SUMD output for external devices
  • Telemetry support for own HoTT sensors and other suppliers sensors
  • Can be fully programmed and operated with previously available HoTT transmitters, thus no more laptop required

Zubehör:
  • 33565.1 Adapter- bzw. Updatekabeladapter (orange und braun muss für den GR-10C getauscht werden)

Q05 Update verfügbar:
  • Schnellerer PID Loop, dadurch noch präziseres Flug- und Einrastverhalten
  • Multishot 8kHz und 32kHz verfügbar
  • Optimierter Airmode, bessere Stabilisierung bei min. Gas
  • Höhere Drehraten möglich
  • Einstellbare Gier Drehraten
  • Einstellbare Dynamik Roll/Nick und Gier für Drehratenbeschleunigung

Related links to "Receiver GR-10C Copter Flight Control"
Technical information
Number of antennas: 1
Aerial length [mm]: 1 x Wire 30
Operating voltage neutral [V] : (2,5) 3,6 ... 8,4
Width [mm]: 27
Frequency : 2400 ... 2483.5
All-up weight [g]: 7
Height [mm]: 12
Channels: 5
Overall length [mm]: 35
Modulation: 2.4 GHz FHSS
Range approx. [m] : 300
Stabilization: Surface, Heli FBL, Copter FC
Current consumption [mA]: 45
Temperature range [°C] : - 15...+70
AIO Copter FC m.HoTTRX + LED Control AIO Copter FC m.HoTTRX + LED Control

Shipping 1-3 workdays

€59.99 *
Receiver GR-18 +3xG + 3A + Vario HoTT Receiver GR-18 +3xG + 3A + Vario HoTT

Shipping 1-3 workdays

€169.99 *
AIO Copter FC m.HoTTRX +12V LED Control AIO Copter FC m.HoTTRX +12V LED Control

Shipping 1-3 workdays

€59.99 *
Gyro Receiver HoTT Falcon 12, 6 Channel Gyro Receiver HoTT Falcon 12, 6 Channel

Shipping 1-3 workdays

€102.99 *
receiver GR-24 HoTT2.4 GHz 12 channel receiver GR-24 HoTT2.4 GHz 12 channel

Shipping 1-3 workdays

€112.99 *
receiver GR-12L HoTT2.4 GHz 6 channel receiver GR-12L HoTT2.4 GHz 6 channel

Shipping 1-3 workdays

€45.99 *
receiver GR-12SC+ HoTT 2.4 GHz 6 channel receiver GR-12SC+ HoTT 2.4 GHz 6 channel

Shipping 1-3 workdays

€35.99 *
receiver GR-12SH HoTT 2.4 GHz +3xG 6 K. receiver GR-12SH HoTT 2.4 GHz +3xG 6 K.

Shipping 1-3 workdays

€61.99 *
receiver GR-32 HoTT2.4 GHz Dual 16 K. receiver GR-32 HoTT2.4 GHz Dual 16 K.

Shipping 1-3 workdays

€143.99 *
NEW
Radio Control mz-16 HoTT 16 Channels Radio Control mz-16 HoTT 16 Channels

Shipping 1-3 workdays

€749.00 *
3D Copter Alpha 300Q HoTT - Finished Model 3D Copter Alpha 300Q HoTT - Finished Model

Shipping 1-3 workdays

€519.99 *
NEW
Gyro Empfänger S1035+XCELL 220 4mm CHAS. Gyro Empfänger S1035+XCELL 220 4mm CHAS.

Shipping 1-3 workdays

€102.99 *
NEW
Flight One Control Revolt RF1 AIO F4 Flight One Control Revolt RF1 AIO F4

Shipping 1-3 workdays

€69.99 *
receiver GR-4 HoTT 2.4 GHz 2 channel receiver GR-4 HoTT 2.4 GHz 2 channel

Shipping 1-3 workdays

€39.99 *
contr. 4in1 ULTRA CONTROL 15A BL Heli S contr. 4in1 ULTRA CONTROL 15A BL Heli S

Shipping 1-3 workdays

€59.99 *
3D Copter Alpha 300Q Kit 3D Copter Alpha 300Q Kit

Shipping 1-3 workdays

€329.99 *
ALPHA 170 3D ALPHA 170 3D

Shipping 1-3 workdays

€225.99 *
contr. 4in1 ULTRA CONTROL 15A BL H S 3D contr. 4in1 ULTRA CONTROL 15A BL H S 3D

Shipping 1-3 workdays

€59.99 *
1 Software Upgrade PRO for mz-24

Shipping 1-3 workdays

€44.00 *
Quadcopter Alpha 250Q Race Copter - kit Quadcopter Alpha 250Q Race Copter - kit

Shipping 1-3 workdays

€199.99 *
USB interface HoTT /GM-Genius USB interface HoTT /GM-Genius

Shipping 1-3 workdays

€28.99 *
Schaltmodul 10A Schaltmodul 10A

Shipping 1-3 workdays

€15.99 *
Quadrocopter Alpha 170Q FPV RACE RTF Quadrocopter Alpha 170Q FPV RACE RTF

Shipping 1-3 workdays

€489.99 *
EXCLUSIVE!
Flite Test VersaCopter 280 quad frame kit Flite Test VersaCopter 280 quad frame kit

Shipping 1-3 workdays

€79.99 *
Adaptor lead Adaptor lead

Shipping 1-3 workdays

€6.99 *
NEW
Empfänger GR18 S1019+XCELL 220 3mm CHAS. Empfänger GR18 S1019+XCELL 220 3mm CHAS.

Shipping 1-3 workdays

€109.99 *