Order number: S4086
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Price incl. Surcharges
The speed version for internal combustion flat-track models scale 1:8 & 1:10 The HGM SST+T... more
The speed version for internal combustion flat-track models scale 1:8 & 1:10
The HGM SST+T servo is a SUMD-V2 telemetry servo for the transmission of data such as current consumption in bar form and max. Current consumption in A, position (angle in degrees) and wear indication.
The servo can be adjusted through the telemetry menu similar to the servo software, e.g. Dead band, trimming, direction of rotation, acceleration, etc.
The servo can either be used with SUMD-V2 or the normal transmission modes.
The remote controls X-8N and X-8E support the SUMD-V2 system.
(Compatible with Sanwa High and Super Response)
Speed version, particularly well suited for internal combustion flat-track models on a scale of 1:8 or 1:10.
- SUMD-V2 telemetry servo
- Parameters can be set by telemetry
- High-voltage, operating voltage up to 8.4 V!
- Direct operation with 2-cell LiPo batteries
- Operating voltage range 4.8 ... 8.4 V
- Housing central part made of aluminium
- 2 x ball bearing
- metal gear
Related links to "Servo brushless HGM SST + T BB MG 20 mm"
|Dimensions [LxWxH in mm]:||40 x 19,5 x 40|
|Operating voltage neutral [V] :||4,8 ... 8,4|
|Angular travel incl. trim, approx. :||2 x 45|
|Holding torque 6.0V, approx. [Ncm]:||200|
|Holding torque 7.4V, approx. [Ncm]:||220|
|Overall length [mm]:||40|
|No-load current drain, approx. [mA] :||35|
|Max. operating frequency [ms / Hz]:||2,5 / 400|
|Servo series:||HGM Servo|
|Torque at 6.0 V, approx. [Ncm]:||90|
|Torque at 7.4 V, approx. [Ncm] :||105|
|Transit speed at 6.0 V, approx. [Sek / 40°] :||0,06|
|Transit speed at 7.4 V, approx. [Sek / 40°]:||0,05|
|Charging rate at 6.0V approx. [mA]:||2430|
|Charging rate of 7.4 V approx. [mA]:||2980|