UniSens-E mit XT60 Stecker

33644
This product is currently not available.
€69.99 *

Prices per unit incl. VAT plus shipping costs

The Unisens E is a special pure telemetry sensor for all electric models. It is so small and... more
The Unisens E is a special pure telemetry sensor for all electric models. It is so small and light, but at the same time so powerful that it can be used in almost every model.

The type of telemetry used must be specified in Unisens E only once in the settings. This is done either through our Unisens E Tool PC program or by UniDisplay. On delivery HoTT GAM is selected.

To change the settings via PC or for firmware updates a suitable USB interface or an existing USB connection cable as of Jeti, multiplex or Graupner is necessary. See also the instructions.

The Unisens E can measure the complete drive without additional sensors, ie voltage, current, capacity and even speed. A special attraction is in fact already a Brushless Speed ​​Sensor permanently installed. A small cable connection to one of the three motor phases only have to be made with the supplied cable for measuring the speed.

As a barometric (atmospheric pressure) level sensor is integrated with high resolution, a Vario with the Unisens E is implemented in addition to the height measurement.

Similarly extensive alarms can be programmed to be reported via telemetry through the respective transmitter.

The Unisens E is available with various connection systems, so that normally nothing needs to be soldered. The current measuring range is symmetrical in both directions. In this way it does not matter the pin assignment, so that the battery male or female has the positive terminal. The measuring direction is just simply set in the setup.

About our UniDisplay all values of Unisens E can be viewed directly live and all settings and alarms can be programmed.

Whether gliders, acrobatic airplane, helicopter, HLG or Slowflyer, Unisens E can be used due to its light weight and compact size in almost every area. Of course the Unisens E is suitable not only for airplanes. It can be installed as well in RC boats, RC cars and so on.

You buy the Unisens E a powerful in all respects universal RC telemetry sensor that exploits the possibilities of modern electronics to give you a little helper to be a great help in dealing with your RC models.

Update with S8344 and 7168.6 possible.

Features
  • Complete measurement of electric drives with current, voltage, power, capacity, speed and altitude measurement
  • integrated brushless speed sensor
  • full telemetry support for Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Robbe / Futaba FASSTest S.BUS2, JR DMSS and FrSky
  • Height measurement with automatic zeroing after switching
  • barometric Vario
  • Current measurement range up to 140 A in both directions, voltage up to 60 V
  • (The maximum current carrying capacity of the connectors used must not be exceeded!)
  • Connection for receiver signal for the remote control of certain functions
  • direct connection to the GPS logger possible to record data in a file
  • Measurement of receiver battery voltage
  • Powered by receiver
  • current status is indicated by LED
  • direct viewing of live or recorded readings with our UniDisplay
  • Parameter settings via PC, UniDisplay and telemetry possible
  • free firmware updates via the PC USB connection with existing cables as of Jeti, multiplex or Graupner possible
  • use almost anywhere due to its compact size and low weight

Package content
    • Unisens E with integrated height sensor / Vario
    • Receiver cable for telemetry / power
    • Connection cables for brushless speed measurement
    • detailed colored manual

    Technical data
    • Current measurement range: 140 A in both directions, so - 140 A to 140 A +
    • The following stress periods are permissible:
    • - 100 A indefinitely
    • - 120 A for 1 minute
    • - 140 A for 20 seconds
    • Depending on the plug-in system, but the limits of the plug are significantly lower!
    • Reasonable values ​​are here:
    • - MPX green (double contact) and XT60 Duration: 50 A / 20s: 70 A
    • - 4mm Gold Plug Duration: 80 A / 20s: 100 A
    • - 5.5 mm gold plug length: 120 A / 20s: 150 A
    • Voltage measurement range: 0 to 60 V
    • Height measurement range: 0 to 8000 m NN, when switching is automatically reset
    • Receiver voltage measurement: 3.8 V to 10 V
    • Data Rate: 10 Hz
    • Power supply: from receiver supply via telemetry connection link (From 3.8 V up to 10 V)
    • Power consumption: 25 mA
    • External connections: 1 connection for telemetry and power ("Link")
    • 1 phase connection for Brushless Speed ​​measurement
    • 1 servo pulse input from the receiver
    • COM port for UniDisplay, GPS logger or PC
    • Dimensions: green MPX connector: 26 (38) x 29 x 9 mm
    • yellow XT60 connector: 26 (50) x 29 x 9 mm
    • 4mm gold connector: 26 (55) x 22 x 9 mm
    • 5.5 mm gold plug: 26 (44) x 22 x 11 mm
    • 6 mm LMT Goldconnector: 26 (42) x 22 x 11 mm
    • Weight: 10 g - 14 g without cable (depending on the plug-in system), connection cable 4 g

    Related links to "UniSens-E mit XT60 Stecker"
Available downloads:
Voltage Module 2 - 4 S, EH Plug Voltage Module 2 - 4 S, EH Plug

Shipping 1-3 workdays

€15.99 *
Voltage Module 2-4S,XH Voltage Module 2-4S,XH

Shipping 1-3 workdays

€15.99 *
Voltage Module 60 V DC Voltage Module 60 V DC

Shipping 1-3 workdays

€26.99 *
Electric Air Module0-14S,Vario m. XT-90 Electric Air Module0-14S,Vario m. XT-90

Shipping 1-3 workdays

€94.99 *
Receiver GR-12+3xGHoTT Receiver GR-12+3xGHoTT

Shipping 1-3 workdays

€76.99 *
GR-12 receiver HoTT GR-12 receiver HoTT

Shipping 1-3 workdays

€65.99 *
jLog S32 Telemetry HoTT/Jive, Kosmik jLog S32 Telemetry HoTT/Jive, Kosmik

Shipping 1-3 workdays

€79.95 *
Vario Module Graupner/SJ HoTT Vario Module Graupner/SJ HoTT

Shipping 1-3 workdays

€52.99 *
RPM Optic Sensor GRAUPNER/SJ HoTT RPM Optic Sensor GRAUPNER/SJ HoTT

Shipping 1-3 workdays

€18.99 *
Receiver GR-8 Race HoTT Receiver GR-8 Race HoTT

Shipping 1-3 workdays

€59.99 *
Receiver GR-18 +3xG + 3A + Vario HoTT Receiver GR-18 +3xG + 3A + Vario HoTT

Shipping 1-3 workdays

€149.99 *
BRUSHLESS CONTROL +T60 G3,5 BRUSHLESS CONTROL +T60 G3,5

Out of stock

€87.99 *
NEW
receiver GR-12SH +3xG HoTT receiver GR-12SH +3xG HoTT

Shipping 1-3 workdays

€59.99 *
BRUSHLESS CONTROL +T18 BEC JR BRUSHLESS CONTROL +T18 BEC JR

Shipping 1-3 workdays

€56.99 *
USB Interface cableHoTT/GM-Genius USB Interface cableHoTT/GM-Genius

Shipping 1-3 workdays

€27.99 *
General Air-Module 2-6S, Vario m. XT-60 General Air-Module 2-6S, Vario m. XT-60

Shipping 1-3 workdays

€76.99 *
Electric Air Module2-14S, Vario HoTT Electric Air Module2-14S, Vario HoTT

Shipping 1-3 workdays

€94.99 *
General Engine-Module 2-6S mit XT-60 General Engine-Module 2-6S mit XT-60

Shipping 1-3 workdays

€57.99 *
receiver GR-12SC+ HoTT receiver GR-12SC+ HoTT

Shipping 1-3 workdays

€34.99 *
Temperature 200°C,Temperature sensor HoTT Temperature 200°C,Temperature sensor HoTT

Shipping 1-3 workdays

€18.99 *
Telemetry Adapter NAZA/HoTT ANYSENSE Telemetry Adapter NAZA/HoTT ANYSENSE

Shipping 1-3 workdays

€54.99 *
Receiver GR-4 HoTT Junior Line Receiver GR-4 HoTT Junior Line

Shipping 1-3 workdays

€39.99 *
Balancer adapter wire XH 2-7S Balancer adapter wire XH 2-7S

Shipping 1-3 workdays

€9.99 *
NEW
Husky 1800S RC Electric Aircraft ARF Husky 1800S RC Electric Aircraft ARF

Shipping 1-3 workdays

€279.99 *
Convers. set mc-24/24iFS+GR-24+Smartbox Convers. set mc-24/24iFS+GR-24+Smartbox

Shipping 1-3 workdays

€229.99 *
GR-16 receiver HoTT GR-16 receiver HoTT

Shipping 1-3 workdays

€76.99 *
Receiver power supply PRX-5A, stabilized Receiver power supply PRX-5A, stabilized

Shipping 1-3 workdays

€59.99 *
receiver GR-12SH+ HoTT receiver GR-12SH+ HoTT

Shipping 1-3 workdays

€34.99 *
Switching module multi-fonction SXM Switching module multi-fonction SXM

Shipping 1-3 workdays

€26.99 *
NEW
Husky 1800S RC Electric Aircraft ARTF Husky 1800S RC Electric Aircraft ARTF

Shipping 1-3 workdays

€371.99 *
Receiver GR-12 L HoTT, 8 channel SMUD +T Receiver GR-12 L HoTT, 8 channel SMUD +T

Shipping 1-3 workdays

€43.99 *