Order number: 13350
Prices per unit incl. VAT plus shipping costs
Shipping 1-3 workdays
Price incl. Surcharges
Fun for small Paleontologist The Pteranodon is modeled on the homonymous pterodactyl dominated... more
Fun for small Paleontologist
The Pteranodon is modeled on the homonymous pterodactyl dominated the air of the Cretaceous, he had a span of about 7 m and a length of about 1.80 m and weighed about 14 kg. The model, however, is made of Vector Board and weighs just 35g, it is printed here in Germany, laser cut and packaged.
Use the Vector Unit from other models, such as Emma or Leo, then it's ready to go after assembly.
Flying and flight characteristics:
The model has very good gliding flight characteristics.
The position of the Vector Unit is chosen so that the model can be controlled easily and easily.
The centre of gravity:
Set so that the model with full throttle keeps its nose up and rises slightly. If you take out the gas, the model airplane goes into a slight curve and slides to the ground.
For more power you can tune the Vector Unit with the Extreme Motor No.34001.4 and the new 220 mAh battery No.78102.1 and use the same propeller as before. If that's still not enough for you, then there's extra power with the Vector Propeller Extreme No.34001.31.B
Assembling is limited to securing the Vector Unit using tape strips (both not included in the kit) applying the self-adhesive rail reinforcements that need to be split, painting, inserting the wings, and attaching the legs to the wings.
For painting the Pteranodon we recommend the No. 182608 Marker UNI POSCA PC-8K Set of 8 from our range
The model Pteranodon:
- Great flight picture
- Very robust by Vector Boards
- Quick assembly without glue
Content of the kit:
- 1x fuselage, 8 mm Vector Board
- 1x wing, 3 mm Vector Board
- 2x legs, 3 mm Vector Board
- 1x bar reinforcement 700x6x0.35mm
- No. 34002 Vector Unit
- S1031 mz-4 HoTT
Related links to "Vector Pteranodon"
|Overall length [mm]:||460|