Polaron EX Combo 7S 3" Color and Touch TFT (Black) > AC-DC CHARGERS

본문 바로가기
사이트 내 전체검색


무제 문서

제품 정보

Polaron EX Combo 7S 3" Color and Touch TFT (Black)

Charge cables, balancing boards, power cord WARRANTY: Two Years



    Professional black color
    Optimal space saving design
    Friendly 3.0” color and TFT LCD touchscreen
    400W at 24V, 220W at 12V per channel
    Charges LiPo, LiLo, LiFe (up to 7 cells), NiCd, NiMh (up to 14 cells), Pb 1-12 cells
    Discharge current 60W per channel
    Supports high voltage LiPo battery charging
    Support for parallel charging of multiple batteries on a single channel
    20 memory battery profile channels for each charge port (total 40 memories)
    USB data port for firmware updates and PC charger monitoring
    External USB charge port for tablets or smartphones
    Built-in servo and sensored motor tester
    Supports tire warmer accessory (not included)

    Input power (AC 100~240V/50~60Hz)
    Temperature range (0~40°)
    Built in protection (Short circuit/ Overload/ Over voltage/ Over power)
    Backside On/Off switch
    Cooling fan and Internal circuits to control heat
    Built in USB connector for multiple device’s (5.0V, 1.0A)
    Short circuit detection
    Easy to carry
    Capable of docking with Polaron EX/PRO/EX1400 Chargers
    Easy to check voltage and current in real time from LCD screen
    Outdoor temperature sensor to check outdoor temperature in a screen
    Polaron EX charger
    Polaron Switching Power Supply
    AC Input Cable
    EH to XH 7S Adapter Board and 7S Cable
    USB Cable
    DC input cable
    Temp Sensor x 2
    Charge Cable x 2
    Alligator Clip x 2
    Charger Stand

    Charge multiple batteries simultaneously with the Graupner Polaron EX dual-charger, for a grand total of 800W. The beautiful TFT LCD touchscreen gives the Polaron EX a user-friendly interface. Automatic setup provides optimal charge profiles, ensuring efficient and safe charging – simply enter the battery type, cell numbers and capacity information and the Polaron EX will do the rest! Eliminate the need to re-enter battery information by using up to 20 different memory profiles – just select the appropriate battery profile and press CHARGE. Prolong the life-cycle of your batteries by discharging them and/or placing them in Store Mode when not in use. Safe handling and monitoring is easy when the Polaron EX is attached to the supplied balancing boards and when used with the enclosed temperature sensors that carefully monitor high charge rate batteries.

    The black casing matches the Switching Power Supply, creating professional-looking continuity. Stay informed on a desktop or laptop computer via the USB connection by monitoring the charging process or upgrading the firmware with our free Graupner Update Studio. The Polaron EX excels at bringing new life to your batteries and hobby experience!

    The Graupner Polaron Switching Power Supply has been specially designed with a genius side-docking power system that eliminates the need for external connecting cables, allowing a seamless coupling to the Polaron EX. The user-friendly LCD screen keeps you informed of integral real-time information regarding consumed current, voltage, and charging environment temperature.

    Charge additional devices simultaneously with additional output connectors, and the frontal USB port provides plenty of power to charge your USB devices! The Polaron Power Supply is the perfect staple for your hobby workshop.
  • Specifications
    Power source 11-28V External DC Power Supply (Docking system)
    Display TFT 3.0” LCD Color Touch screen
    Battery Type & Cells NiCd, NiMH / 1~14 cells / each channel
    LiPo, LiFe, LiIo / 1~7 cells / each channel
    Pb / 1~12 cells (2V/cell) / each channel
    Output 2 Channels (400W x 2CH = 800W)
    Charge Current 0.1 ~ 20.0A (100mA steps) / Max. 400W-24V, Max. 220W-12V
    Discharge Current 0.1 ~ 10.0A (100mA steps) / Max.60W
    Cycling Discharge / Charge to Discharge / Discharge to Charge
    Balancing current Max. 350mA
    USB USB 5V output (5.0V 2.5A ) / USB B-Type
    Sub Function Servo Test, Sensored Motor Test, Warmer
    Firmware upgrade External Mini USB device
    PC communication Data Monitoring and Logging
    Languages English Default, other languages with firmware update
    Cooling system
    x 2ea Dynamic Cooling Fan
    1.97 x 1.97 x 0.39 in
    50 x 50 x 10 mm
    Ext. Module socket Futaba 3P socket
    Motor Test socket ZHR
    Servo Test socket Futaba 3P socket
    Memory Each channel 20 memories (20 x 2CH = 40 memories)
    SMPS Docking Terminal Yes
    Dimension 3.47 x 8.00 x 7.73 in
    88.2 x 203.4 x 196.3 mm
    Weight 48.25 oz (3.01 lbs)
    1368 g
    Input power AC 100-240V
    Output voltage DC 12V
    Output current Max. 30A (Continuous current: 25A)
    USB connector 5.0V 1.0A
    Output connector Front 2ch
    Side 1ch
    Cooling Fan 1.57 x 1.57 x 0.39 in
    40 x 40 x 10 mm
    Size 0.79 x 7.66 x 7.85 in
    55 x 194.6 x 199.4 mm
    Display B/W Backlight LCD Display
    Weight 42.79 oz (2.67 lbs)
    1213 g
  • S8503 - Polaron WLAN Module Manual

  • 이전
  • 목록
  • 다음
ADD : Building 202, 8th floor, 18, Bucheon-ro 198beon-gil, Bucheon-si, Gyeonggi-do, Republic of Korea
TEL : 032-623-0733 / FAX : 032-623-0720 / E-mail :sales@graupner.com
Copyright © Graupner. CO., LTD. ALL RIGHTS RESERVED.