Receiver GR-4 HoTT - V_0v10

GR-4 HoTT | #33502
 gr-4_eng Version: V_0v10
Other downloads: - Handbuch, Manual, Manuel
- Firmware-Upgrade

ESC ASCII mode is not working (other sensors work)
Added P0.5 FULL-UP function


The update should be performed with the Firmwareupgrader >3.7.
The update should be performed 2 times.
Thereafter a factory reset should be made

This receiver has only one (green) LED!


After the update a factory reset should be made! Push and hold the bind- button then switch the receiver ON and wait about 3 seconds until the LED light up. Release the button. Without reset the servos might run to their mechanical end point!

Tags: GR-4
Please enter these characters in the following text field.

The fields marked with * are required.

Related products