Receiver GR-8 HoTT - V2v003

GR-8 HoTT | #33504
gr-8_eng  Version: V2v003     
Other downloads: - Firmware-Upgrade
Changes: Different optimizations regarding telemetry and EN 300328 1.8.1

The update must be performed with the Firmwareupgrader >3.7
This receiver has only one (red) LED!

Attention: After the update a factory reset should be performed!
Push and hold the Bind button then switch the receiver ON and wait about 3 seconds until the LED light up.
Release the button. Without reset the servos might run to their mechanical end point!
Tags: GR-8
Please enter these characters in the following text field.

The fields marked with * are required.

Related products
receiver GR-8 HoTT 2.4 GHz Race 4 C receiver GR-8 HoTT 2.4 GHz Race 4 C

Shipping 1-3 workdays

€61.99 *