Receiver GR-12L HoTT - V 1a90

GR-12L HoTT | #S1012
  Version: V 1a90      
Other downloads: - Firmware-Upgrade
Anleitung/Manual
Changes:

V 1a50
• Binding to transmitter module possible
• Sensor operation possible
• SUMD operation fixed
• Range of voltage warning amplified for 2S LiPo

V 1a70 
• Servo reverse function

V 1a90
• Problems with JR DS387, DS318 servos solved
Specials:

The update should be performed with the Firmwareupgrader >3.7

This receiver has only one (red) LED

Attention:


After the update a factory reset should be performed!
Push and hold the Bind-button then switch the receiver ON and wait about 3 seconds until the LED light up.
Release the button. Without reset the servos might run to their mechanical end point!
Tags: GR-12L
Please enter these characters in the following text field.

The fields marked with * are required.

Related products
receiver GR-12L HoTT receiver GR-12L HoTT

Shipping 1-3 workdays

€43.99 *