Receiver GR-24 HoTT - Version 3a90

GR-24 HoTT | #33512
  Version: V 3a90  
Other downloads: - Handbuch, Manual, Manuel
- Firmware-Upgrade
Changes:

V3a80
- 0 values are prevented for telemetry outputs
- Telemetry is faster
- The version with FS in the name outputs of the original SUMD protocol with FAILSAFE BIT
- The version without FS in the name outputs the SMUD protocol without FAILSAFE BIT (for flybarless systems that have not implemented the SUMD protocol correctly) 

V3a90 from 27 June 2017
- Telemetry is faster

Special: The update should be performed with the Firmwareupgrader >3.7.
The update should be performed 2 times.
Thereafter perform a factory reset
Attention:

After the update a factory reset should be performed!
Push and hold the Bind-button then switch the receiver ON and wait about 3 seconds until the LED light up.
Release the button.
Without the reset the servos might run to their mechanical end point!

Tags: GR-24
Please enter these characters in the following text field.

The fields marked with * are required.

Related products
GR-24 receiver HoTT GR-24 receiver HoTT

Shipping 1-3 workdays

€109.99 *