Receiver GR-32 HoTT - Version 4a20

GR-32 HoTT | #33516


Other downloads: - Handbuch, Manual, Manuel
- Firmware-Upgrade

- 0 values are prevented for telemetry outputs
- Telemtry is faster
- The version with FS in the name outputs of the original SUMD protocol with FAILSAFE BIT
- The version without FS in the name outputs the SMUD protocol without FAILSAFE BIT (for flybarless systems that have not implemented the SUMD protocol correctly)

V4a20 from 27 June 2017
- Telemetry is faster

Specials: • The update should be performed with the Firmwareupgrader >3.7.
• The update should be performed 2 times.
• Thereafter a factory reset should be performed
Attention: After the update a factory reset should be performed!
Push and hold the Bind button then switch the receiver ON and wait about 3 seconds until the LED light up.
Release the button.
Without reset the servos might run to their mechanical end point!
Tags: GR-32
Please enter these characters in the following text field.

The fields marked with * are required.

Related products
GR-32 receiver HoTT  GR-32 receiver HoTT

Shipping 1-3 workdays

€139.99 *